Active Member
|
[China]
Address: Second Floor, No.3 Zhenbao Industrial Zone，No.137 Shiyan Road，Shiyan Street，Baoan District，Shenzhen，China
Contact name:sales
FRECON Electric (Shenzhen) Co., Ltd. |
|
|
Three phase 380V AC output drive frequency inverter VFD AC drive
Project | Specifications | |
Power input | Rated input voltage (V) | 3-phase 380 V (-15%~+30%) |
Rated input current (A) | See table 2-1 | |
Rated input frequency(Hz) | 50Hz/60Hz,tolerance±5% | |
Power output | Applicable motor(kW) | See table 2-1 |
Rated output current(A) | See table 2-1 | |
The maximum output voltage(V) | 0~rated input voltage, error<±3% | |
The maximum output frequency(Hz) | 0.00~600.00 Hz,unit0.01Hz | |
Control | V/f patterns | V/f control |
Speed range | 1:50 (V/f control) | |
Speed accuracy | ±0.5% (V/f control) | |
Speed fluctuation | ±0.3% (sensor-less vector control 1 & 2) | |
Torque response | < 10ms (sensor-less vector control 1 & 2) | |
Starting torque | 0.5Hz: 180% (V/f control, sensor-less vector control 1) | |
Basic functions | Carrier frequency | 0.7kHz~16kHz |
Overload capability | G Model:150% Rated Current 60s,180% Rated Current 10s,200% Rated
Current 1s. | |
Torque boost | Automatic torque boost;Manual torque boost 0.1%~30.0% | |
V/F Curve | Three ways:Three ways: straight; multi-point type; N Th-type V / F
curve(1.2 Th -type, 1.4 Th -type, 1.6 Th -type, 1.8 Th -type, 2 | |
Acceleration and deceleration Curve | Line or curve acceleration and deceleration mode. | |
DC brake | DC brake start frequency: 0.00~600.00Hz | |
Basic functions | Jog brake | Jog frequency range:0.00Hz~50.00Hz. |
Simple PLC, Multi-speed | Through the built-in PLC or control terminal to achieve up to 16 speed running | |
Built-in PID | Facilitate the realization of process control loop control system | |
Automatic voltage adjustment(AVR) | When the grid voltage changes, can automatically maintain a constant output voltage | |
Fast current limit function | Minimize over current fault protection inverter running | |
Over voltage Over current | System automatically limits of current and voltage during operation to prevent frequent | |
Run | Command source | Given the control panel, control terminal, serial communication port given. |
Frequency given | 9 kinds of frequency given sources: digital setting, keyboard
potentiometer setting, analog | |
Input terminal | 7 Switch input terminals, one way to make high-speed pulse input. | |
output | 2-way switch output terminal, which supports a maximum road speed
100kHz pulse output. | |
Featured | Parameter copy, parameter backup, flexible parameter displayed
& hidden. Common DC bus(Contains below 30 KW). | |
Protection | Provide fault protection dozen: Overcurrent, Overvoltage, Undervoltage, Overtemperature, Overload Etc Protection. | |
Display and keyboard | LED Display | Display Parameters |
Key lock and function selection | Realize some or all of the keys locked, scope definition section keys to prevent misuse | |
Run and stop monitoring information | In the run or stop can be set to monitor U00 group four objects were. | |
Environment | Place of | Indoors, no direct sunlight, free from dust, corrosive gases, |
Altitude | 0~2000m | |
Ambient | -10℃~40℃ | |
Relative | 5~95%, no condensation | |
Vibration | Less than 5.9m/s2 (0.6g) | |
Storage | -20℃~+70℃ | |
Others | Efficiency | Rated power≥93% |
Installation | Wall-mounted or Flange mounting | |
IP grade | IP20 | |
Cooling | Fan cooled | |
FR500 high-performance vector frequency converter is for the
technical and performance problems encountered so far in equipment
in the cable, machine tool, metal products, petrochemical, natural
gas, lifting equipment, pulp and paper, textile, printing and
dyeing, ceramics and other industries. Can be easily solved.
High performance, high quality, high power density design, and
significant improvements in ease of use, maintainability,
environmental protection, installation space and design standards
can further optimize the user experience.
Used in: fans, water pumps, wire drawing machines, injection molding machines, ball mills, machine tools, air compressors, belt conveyors, industrial washing machines, lifting industries and other industries and equipment.
● Wide range of applications
Suitable vector control induction motor and permanent magnet synchronous motors, reduce inventory user, regardless motor type compatibility issues, no longer need to stock various different drive motors are prepared;
● Excellent performance
Good control performance: 1: 200 ratio governor (SVC), 0.25Hz / 150% starting torque, a variety of braking mode without braking resistor on the fast flux braking mode can be achieved;
● environmental adaptability
The compact design, independent duct design, installation, greatly enhance the power density, the user effectively reduce the mounting volume required to meet the users demanding installation conditions;
Fully independent duct design, effectively enhance the protective effect of the inverter, to adapt to a variety of complex user environment of the scene;
Compatible with the base plate and flange mounting two installation modes to adapt to different user requirements;
● feature-rich
Two sets of motor parameters, V • F separation is provided, the virtual terminal function, speed track, the output relay delay and the like;
Two sets of motor parameters, to meet the different customers share a drive motor, reduce investment client device;
V • F separation function, power inverter meet customer demand, flexible set V / F curve;
● High reliability
The introduction of thermal simulation technology, all models have carried out thermodynamic simulation, planning effective cooling machine, improve product reliability;
Full range of products built-C3 level filter, the effective elimination of the drive to external interference, to enhance the compatibility of the product;
All products go through a complex product verification high temperature, low temperature, low pressure, vibration, etc., from the source to ensure the reliability of the product;
All products passed CE certification, the German TUV-SUD product certification, TUV-mark and affix CE marking, the products meet the most demanding technical requirements of standard products in Europe;
Powerful hardware configuration: a wide input voltage range, either the DC input DC bus design, built-in brake unit (30kW or less), high-performance LED may be cited external keyboard, a large number of I / O terminals, C3 standard filter Wait.
● A variety of options
Alternatively multiple communication expansion cards, high performance LCD keypad liquid crystal, a filter, an auxiliary power brake unit, the energy unit and the feedback reactors and other options for extensions.
Company profile
FRECON is an enterprise accredited by the double soft in shenzhen city, a new high-tech enterprise which is strongly supported by central government, a professional company in the field of industrial automation, efficient energy saving and green new energy. FRECON has more than 10 years experience of development and application on frequency converter, servo driver, energy-saving control cabinet, industrial robot , Solar inverter system,electric cars and control system. Product power range covers 0.2 KW ~ 1 MW. In the aspects of EMC and safety, FRECON products are in accordance with the European Union CE directive requirements.
FRECON has more than 40 patents and copyright like inventions, utility models, appearance and software copyright, and so on.
FRECON executes the ISO9001:2008 quality system standard strictly. FRECON products are widely used in the equipment manufacturing industry and energy saving renovation project, mainly related to the elevator, petroleum, chemical, steel, ceramics, textiles, wire drawing machine, air compressor, machine tools, solar energy, and many other fields.
FRECON has five regional logistics center in China: east China(wuxi), south China (shenzhen) , north China (Beijing), southwest (chongqing), northeast (shenyang), and 21 offices in China, whose logistics and service network covers the whole country .FRECON has coinsurance centers and distribution network in more than 40 countries such as Australia, Poland, Spain, South Africa, Russia, India,Bangladesh, Vietnam, and so on.
Exhibition promotion
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: Do you provide samples is it free or extra??
A:. Yes, we could offer the sample to test with reasonable charges
We can send the sample to you by express like DHL or UPS, normally
you can receive the sample in one week.
Q: What is your terms of payment?
A:. 100% in advance Welcome pay by Trade Assurance through Alibaba
so your payment can get guarantee from Alibaba company L / C and O
/ A would be possible for regular customers..
Q: What is your terms of packing?
A:. Generally, we use carton box pack reasonable special packing
requirements from customers are acceptable for us.
Q. Do you test all your goods before delivery?
A: Yes, 100% test before delivery
Q: How long is your delivery time?
A: If you have the goods, normally it takes 5-10 days. Or 15-20
days if there is no cargo, according to the number of calculations.
We have rich experience in supply large customers, so do not worry
about the delivery time.
With years of export experience, excellent quality, advanced
services and competitive prices, Frecon Electric has won numerous
customer trust and support.
