FRECON Electric (Shenzhen) Co., Ltd. |
|
Frecon General Purpose Inverter FR150A-2S-1.5GB-H
Project | Specifications | ||
Power input | Rated input voltage (V) | 1-Phase 220V (-15%~+20%) | |
3-phase 380 V (-15%~+30%) | |||
Rated input current (A) | See table 2-1 | ||
Rated input frequency (Hz) | 50Hz/60Hz,tolerance±5% | ||
Power output | Applicable motor (kW) | See table 2-1 | |
Rated output current (A) | See table 2-1 | ||
The maximum output voltage (V) | 0~rated input voltage, error<±3% | ||
The maximum output frequency (Hz) | 0.00~600.00 Hz,unit0.01Hz | ||
Control | V/f patterns | V/f control | |
characteristics | Sensor-less vector control 1 | ||
Sensor-less vector control 2 | |||
Speed range | 1:50 (V/f control) | ||
1:100 (sensor-less vector control 1) | |||
1:200 (sensor-less vector control 2) | |||
Speed accuracy | ±0.5% (V/f control) | ||
±0.2% (sensor-less vector control 1,2 ) | |||
Speed fluctuation | ±0.3% (sensor-less vector control 1,2 ) | ||
Torque response | < 10ms (sensor-less vector control 1,2 ) | ||
Starting torque | 0.5Hz: 180% (V/f control, sensor-less vector control 1) | ||
0.25Hz:180%(sensor-less vector control 2) | |||
Basic functions | Carrier frequency | 0.7kHz~16kHz | |
Overload capability | G Model:150% Rated Current 60s,180% Rated Current 10s,200% Rated Current 1s. | ||
Torque boost | Automatic torque boost;Manual torque boost 0.1%~30.0% | ||
V/F Curve | Three ways: Three ways: straight; multi-point type; N Th-type V / F curve(1.2 Th -type,1.4 Th -type,1.6 Th -type,1.8Th -type,2Th | ||
-type) | |||
Acceleration and deceleration Curve | Line or curve acceleration and deceleration mode. | ||
Four kinds of acceleration and deceleration time,Ramp Time Range :0.0~6000.0s | |||
DC brake | DC brake start frequency: 0.00~600.00Hz | ||
DC brake time:0.0s~10.0s | |||
DC brake current:0.0%~150.0% | |||
Basic functions | Jog brake | Jog frequency range:0.00Hz~50.00Hz. | |
Jog deceleration time: 0.0s~6000.0s. | |||
Simple PLC,Multi-speed | Through the built-in PLC or control terminal to achieve up to 16 speed running | ||
Built-in PID | Facilitate the realization of process control loop control system | ||
Automatic voltage adjustment(AVR) | When the grid voltage changes, can automatically maintain a constant output voltage | ||
Fast current limit function | Minimize over current fault protection inverter running | ||
Over voltage Over current | The system automatically limits the current and voltage during operation, prevent frequent | ||
Run | Command source | Given the control panel, control terminal, serial communication port given. | |
Frequency given | 9 kinds of frequency sources: digital setting, keyboard potentiometer setting, analog | ||
A given voltage, analog current setting given pulse, a given port, a given multi-speed, PLC given, process PI | |||
D reference. There are several ways to switch | |||
Protection | Provide more than ten fault protection: overcurrent, overvoltage, undervoltage, overtemperature and overload protection. | ||
function | |||
Display and keyboard | LED Display | Display Parameters | |
Key lock and function selection | Implement some or all the key lock, the key portion defined range, to prevent misuse | ||
Run and stop monitoring information | In the run or stop can be set to monitor U00 group four objects were. | ||
Environment | Place of | Indoors, no direct sunlight, free from dust, corrosive gases, | |
operation | flammable gases, oil mist, water vapor, water drop and salt, etc. | ||
Altitude | 0~2000m | ||
De-rate 1% for every 100m when the altitude is above 1000 meters | |||
Ambient | -10℃~40℃ | ||
temperature | |||
Relative | 5~95%, no condensation | ||
humidity | |||
Vibration | Less than 5.9m/s2 (0.6g) | ||
Storage | -20℃~+70℃ | ||
temperature | |||
Others | Efficiency | Rated power≥93% | |
Installation | Wall-mounted or DIN-rail mounting | ||
IP grade | IP20 | ||
Cooling | Fan cooled | ||
method |
FR150A series inverter is FRECON adoption of a series of high-performance, Compact, low-noise inverter independently developed a new concept. Under the premise of improving the stability of a simple vector increases, practical PI regulator, light load oscillation suppression, the input and output phase, speed tracking start and flexible input and output terminals, online parameters, the identification signal from the transmission failure, power outage, and stopping parameter storage, swing frequency control, RS485 control and a series of practical operation of advanced control functions.Efficient Dynamics, friendly operation, compact size, rugged design, it is FR150A series portrayal. Through FR150A, FRECON industrial automation will continue to innovative technology, uncompromising quality requirements and global quality assurance services, and actively with customers "a new change in the future."
Application areas:
is widely used in textiles, printing and dyeing, washing, cable, packaging, machinery, ceramics, constant pressure water supply, constant temperature control or various OEMs.
LED digital display
Can display or set inverter related parameters
Automatic energy-saving operation
According to the load condition, the V/F curve is automatically optimized to realize energy-saving operation
Automatic current limit
Automatically limit the current during operation to prevent frequent over-current fault trips
About us
FRECON software enterprise is a key supporting high-tech enterprise in the center of Shenzhen, and a professional company in the fields of industrial automation, high efficiency and energy saving, and green new energy. FRECON has 10 years of development and application experience in the fields of inverters, servo drives, and energy saving
Control cabinets, industrial robots, solar inverter systems, electric vehicles and control systems. Covering power 0.2 KW~1 MW. In terms of EMC and safety, FRECON products comply with the European Union CE Directive.
FRECON 40 has a number of patents and copyrights for inventions, utility models and software copyrights.
FRECON strict implementation of the ISO9001: 2008 quality system standards. FRECON products are widely used in equipment manufacturing and energy-saving projects, mainly related to the elevator,
Petroleum, chemicals, iron and steel, ceramics, textiles, wire drawing machines, air compressors, machine tools, solar energy and other fields.
There FRECON East China (Wuxi), South China (Shenzhen), North China (Beijing),
Southwest (Chongqing), the Northeast (Shenyang) five regional logistics center, has 21 offices in China, logistics service network covering the whole country. FRECON has coinsurance centers and distribution network in over 40 countries such as Australia, Poland, Spain, South Africa, Russia, India, Bangladesh, Vietnam and so on.
Exhibition promotion
Q: You are trading companies or manufacturers?
A: We are factory.
Q: Do you offer free samples or extra?
One of:. Yes, we can offer at a reasonable cost. We can express
(such as DHL or UPS) will send you a sample of a sample being
tested, you can usually receive a sample within a week.
Q: What are your payment terms?
One of:. Welcome to the Alibaba trade guarantee 100% advance, so
you can rest assured that pay Alibaba L / C and O / A, for the
average customer is possible ..
Q: What are your packaging conditions?
One kind:. Usually we cartons, we can accept customer reasonable
special packaging requirements.
Q: You can test all the goods before delivery?
A: Yes, 100% tested before shipment
Q: How long is your delivery time?
A: If you have the goods, normally takes 5-10 days. Not available,
or 15-20 days, depending on the number of pieces. We have extensive
experience in supply to large customers, so do not worry about the
delivery time.
With years of export experience, excellent quality, advanced services and competitive prices, Frecon Electric has won numerous customer trust and support.