V-Hold Woodworking Machinery Co., Ltd. |
|
four side planer with four head for wood moulding, Overall dimensionsL3050*W1400*H1700,Suttle2100kg
Four Side Planer VH-M416, VH-M418 and VH-M416GH have 4 heads with same motor power, there
are one left spindle, one right spindle, one upper spindle and one spindle on the bottom. Each spindles
have its own Motor, which can guarantee the power for cutting.
Body structure of both Planers is made of casting Iron, it has better wear resistance and shock
absorption. This provides a good basis for the smooth operation of the spindles and feeding system.
Both planer have hard chromed worktable which can minimize abrasion and enhance operational life
span.
There pressing wheel mechanism for short materials in the front of the planer, ensuring the smooth
conveying of the short materials.
The only difference between VH-M416 and VH-M418 are their processing width, for VH-M416 can only
process materials no wider than 160mm, VH-M418 can process bigger materials with 180mm width. It
depends on what kinds of wood materials customer use. VH-M416 and VH-M418 use Inverter to feed,
speed range is 6-36m/min. While High speed moulder VH-M416GH can have speed up to 60 m/min,
high working speed dramatically increases production capacity, greatly reduce labor costs. |
What our planer can do ?
Sauna board
| Finger-joint board |
Professional solution for producing high-volume
laminated finger-joint board, Sauna board, by
using our high speed planer VH-M416GH can
highly improve efficiency. |
Model | VH-M418 | VH-M416/ VH-M416B | VH-M416GH | |
Specification | Working width | 25-180 | 25-160 | 25-160 |
Working thickness | 8-130 | 8-120 | 8-120 | |
Working table length | 1500 | 1500 | 1500 | |
Feeding speed | 6-36 | 6-36 | 6-60 | |
Main spindle diameter (mm) | Φ 40 | Φ 40 | Φ40 | |
Main spindle revolution(r/min) | 6500 | 6500 | 7000 | |
Air pressure (Mpa) | 0.6 | 0.6 | 0.6 | |
Motor power(KW) | 1st LowerShaft | 4kw/5.5HP | 4kw/5.5HP | 4kw/5.5HP |
Right vertical spindle | 4kw/5.5HP | 4kw/5.5HP | 4kw/5.5HP | |
Left vertical spindle | 4kw/5.5HP | 4kw/5.5HP | 4kw/5.5HP | |
1st UpperShaft | 5.5kw/7.5HP | 5.5kw/7.5HP | 5.5kw/7.5HP | |
Feeding beam lifting | 0.55kw/0.75HP | 0.55kw/0.75HP | 0.55kw/0.75HP | |
Feeding motor | 3kw/4HP | 3kw/4HP | 4kw/4HP | |
Total power | 21.05kw/28.6HP | 21.05kw/28.6HP | 22.05kw/28.6HP | |
Cutter diameter | 1st Lower Shaft | Φ 125 | Φ 125 | Φ125 |
Right Vertical spindle | Φ 125-Φ 160 | Φ 125-Φ 160 | Φ125-Φ160 | |
Left vertical spindle | Φ 125-Φ 160 | Φ 125-Φ 160 | Φ125-Φ160 | |
1st Upper Shaft | Φ 125-Φ 160 | Φ 125-Φ 160 | Φ125-Φ160 | |
Remark | Feeding wheel diameter (mm) | Φ140 | Φ140 | Φ140 |
Dust outlet diameter(mm) | Φ140 | Φ140 | Φ140 |