Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Flange Style Reaction Torque Sensor 1000kgf*m 500kg*m 300kgf-m 200kgf*m 100kg-m
Flange-to-Flange Type Reaction Torque Transducer FT03 is made of
high stiffness alloy steel based on strain gauge technology, flange
style torque transducer FT03 delivers mV/V signal from wheatstone
bridge bonded on a specially machined body.Flange to flange design
makes it easy to mount FT03 to existing strutures.Torque
meter FT03 is available in a very wide measuring range from
200NM up to 100kNm,you may find FT03 suitable for applications such
as motor torque measurement, test bench applications, screw driver
calibration, fatigue testing, twist measurement, motor
dynamometers, actuator test as so on. Reaction
Torquemeter FT03 can be modified or customized to meet
requirements of different applications.
Dimensions
Specifications
| Capacity | 200Nm / 147 lbf*ft / 20 kg*m 300N*m / 221 lb*ft / 30kgf*m 500N-m / 368 lb-ft / 50kg-m 1000Nm / 737 lbf-ft / 100 kgf*m 2000N-m / 1475 lbf*ft / 200kg*m 3000Nm / 2212lbf*ft / 300 kgf*m 10kNm / 7.4k lbf*ft / 1000kg*m 20kNm / 14.7klb*ft / 2000kgf-m 30k N*m / 22k lbf*ft / 3000 kg*m 40kNm / 29.5klb-ft / 4000 kgf*m 60kNm / 44klb-ft / 6000kg*m 70kN*m / 51.6k lbf*ft / 7000 kgf*m 80kNm / 59k lb*ft / 8000 kg*m 100kNm / 73.7 klb-ft / 10000kgf*m |
| Rated output | 1.5mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | 200NM~10kNM: ±0.25% R.O. |
| Hysteresis | 200NM~10kNM: ±0.25% R.O. 20k~10kNM: ±0.5% R.O. |
| Nonrepeatability | 200NM~10kNM: ±0.1% R.O. 20k~10kNM: ±0.2% R.O. |
| Creep(10min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 700±100 ohms |
| Output resistance | 700±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP50 |
| Material of element | Alloy steel |
| Cable | Ø5*3000mm 4-core shielded cable (Mating connector included) |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A torque sensor is a transducer that converts mechanical torque
into mV signal proportional to the applied torque.The acting
torsion causes deformation of the measuring element,the bonded
strain gage deforms accordingly which will cause the resistance
change of the wheatstone bridge,under constant power supply, the
output signal between Sig+ and Sig- will change proportionally,thus
the moment can be measured by measuring the output signal from the
transducer.The output range of FT03 is normally within
-20mV...+20mV, signal amplification may be required for most
applications, a signal conditioner can be used to get -5~5V, 0-10V
or 4-20mA output for easy data processing.
