Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Through hole torque sensor Custom made thru-hole torque transducer
Through hole torque sensor FTHC is made of stainless
steel based on strain gauge technology to deliver maximum 0.3%
non-linearity of the rated output,model FTHC offers 5NM / 10NM
/ 20NM / 30NM / 40NM measuring ranges to choose from.Low profile
design,through hole structure,flange to flange mounting,working
with servo or stepper motor,joint torque sensor FTHC can help make
robot joint motion control more smoother.Besides the standard
specifications,custom made service according to client's specific
requrements is also available at Forsentek.
Specifications
| Rated capacity | 5NM 10NM 20NM 30NM 40NM(Customizable) |
| Rated output | 1.0 mV/V |
| Excitation | 3-12V |
| Zero balance | ±3% F.S. |
| Non-linearity | ±0.3% F.S. |
| Hysteresis | ±0.3% F.S. |
| Non-repeatability | ±0.1% F.S. |
| Creep(10min) | ±0.1% F.S. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temp. | -10...+40oC |
| Operating temp. | -20...+60oC |
| Temp. shift zero | ±0.02% F.S./oC |
| Temp. shift span | ±0.01% F.S./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP60 |
| Material of element | Stainless steel |
| Cable | Ø3.2*3000mm 4-core shielded cable |
| Wiring code | Red--Exc+ Black--Exc- Green--Sig+ White--Sig- |
Thru-hole torque transducer 5NM 10NM 20NM 30N 40NM
Dimensions(unit in milimeter)
