Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Multi axis load cell 3kN triaxial force sensor 300kg 3-axis load cell
Triaxial force sensor F3A is designed to measure force in Fx/Fy/Fz at the same time,each axis is able to measure force in both tension and compression direction.Flange to flange mounting,easy to install.Typical applications for this type of transducer are for example force exertion control in robotics, automotive crash testing, industrial test benches, grinding force control, actuator operating force measurement and so on.
Specifications
| Rated Capacity | 50kg / 500N / 110lb 100kg / 1kN / 220lbf 200kg / 2kN / 440lb 300kg / 3kN / 660 lbf 500kg / 5kN / 1100lbf 1000kg / 10kN / 2200 lb |
| Sensitivity | 1.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Non-linearity | ±0.5% R.O. |
| Hysteresis | ±0.3% R.O. |
| Non-repeatability | ±0.2% R.O. |
| Creep(10min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | 0...+40oC |
| Operating temperature | -10...+60oC |
| Temperature shift on zero | ±0.02% R.O./oC |
| Temperature shift on span | ±0.02% R.O./oC |
| Input resistance | Fx/Fy: 380±30 ohms Fz: 710±30 ohms |
| Output resistance | Fx/Fy: 355±5 ohms Fz: 710±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | <100kg Aluminum alloy >50kg Stainless steel |
| Cable | F3A: Ø6*3000mm 8-pin shielded cable (x1) F3B: Ø5*3000mm 4-pin shielded cable (x3) |
| Wiring code | 4-wire connection for each axis |
3 axis load cell 1000kg 500kg 300kg 200kg 100kg 50kg Multi-axis force sensor
Dimensions(Unit in "mm)
