Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Specifications
| Capacity | 1 kgf-cm 2 kgf*cm 5kgf-cm 10kgf-cm 20kgf-cm 30 kgf*cm 50kgf-cm 100 kgf*cm 200kgf-cm |
| Rated output | 1.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±2% R.O. |
| Non-linearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Non-repeatability | ±0.1% R.O. |
| Creep(10min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temp. | -10...+40oC |
| Operating temp. | -20...+60oC |
| Temp. shift zero | ±0.02% R.O./oC |
| Temp. shift span | ±0.01% R.O./oC |
| Input resistance | 700 ohms |
| Output resistance | 700 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP50 |
| Material of element | 0-5NM Aluminum alloy |
| Cable | Ø3*3000mm 4-core shielded cable |
| Wiring code | Clockwise |
Small torque sensor FTE with flange mounting
Torque sensor is a transducer that converts a torsional mechanial
input into an electrical output signal.Torque value can be
displayed by working with torque meter.Digital indicator FPT is
integrated with high accuracy 24-bit ADC,up to 960Hz sampling speed
make it suitable for both static and dynamic measurement.FPT also
supports RS485/RS232 communication interface and 0-10V/0-5V/4-20mA
signal output proportional to the measured torque which can be
collected by PLCs.
Dimensions(unit in "mm")
