Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Static torque sensor FTE
Features
Dimensions
Specifications
| Capacity | 0.1Nm 0.2Nm 0.5Nm 1Nm 2Nm 3Nm 5Nm 10Nm 12Nm 15Nm 20Nm |
| Rated output | 1.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±2% R.O. |
| Nonlinearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(10min) | ±0.1% R.O. |
| Safe overload | 120% F.S. |
| Ultimate overload | 150% F.S. |
| Compensated temp. | -10...+40oC |
| Operating temp. | -20...+60oC |
| Temp. shift zero | ±0.02% R.O./oC |
| Temp. shift span | ±0.01% R.O./oC |
| Input resistance | 700 ohms |
| Output resistance | 700 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP50 |
| Material of element | Aluminum alloy |
| Cable | Ø3*3000mm |
| Wiring code | Red--EXC+ Black--EXC- Green--Sig+ White--Sig- |
Torque indicator torque display FPT
Technical parameters
CE certified
Aluminum housing,compact size
24 bit Sigma-Delta ADC,high accuracy
Power supply: 24V DC
Load cell excitation: 5V DC
Input range: -10mV~10mV
Load cell connection: 4-wire or 6-wire
Display range: -99999....999999
High sampling speed: 120Hz/480Hz/960Hz settable
Working temperature: -10...+40oC
Humidity: <90% RH without dew
Non-linearity: <0.01% F.S.
I/O: 1 input and 2 outputs
Communication interface: RS485 or RS232
Analog output: 0-5V/0-10V/0-20mA/4-20mA/User self-define
Zero tracking
Peak hold
Dimensions
Static torque tester consists of static torque sensor and torque indicator,reaction torque transducer can turn mechanical torque into mV signal which is proportional to applied torque, torque indicator can display the torque value after calibrated with torque transducer.
