Active Member
|
[China]
Address: Zhuodaoquan，Hongshan Dist. Wuhan City, Hubei province
Contact name:logen
Hubei Forry Environment Technology Co.,Ltd--Tower Factory |
|
|
Cross flow cooling tower, a type of cooling tower which water falling from the top tower vertically, air flow
through the water spray packing horizontally. Water and air flows orthogonally.
Technical data of cross flow square type cooling tower ST-200
Item | Content | Parameter | Note |
Basic data
| Type | Cross flow square type |
|
Model | ST-200 |
| |
Water flow | 200 m3/h |
| |
Inlet/outlet temperature | 37℃／32℃ | ΔT=5℃ | |
Wet bulb temperature | 31.5℃／28℃ |
| |
Cooling capacity | 1000,000 kcal/h |
| |
Noise value | 59dB(A) | Standard point | |
Power supply | 400V／3P／50Hz |
| |
Water quality | PH=6-8 |
| |
Design data | Gas-water ratio | 0.97kg/kg |
|
Water resistance | 36kpa |
| |
Drift loss | ≤0.005% |
| |
Evaporating loss | ≤0.833% |
| |
Net weight / Running weight | 1,655 kg／4,510 kg |
| |
Fan data | Fan type | Axial-flow |
|
Air flow | 120,000 m3/h |
| |
Static pressure | 74Pa |
| |
Fan rotate speed | 450 r/min |
| |
Diameter(F) | 1,500 mm | 2sets | |
Blade quantity | 4 pcs／set |
| |
Motor power | 4kW x 2 | 2sets | |
Type of drive | Direct drive |
| |
Motor starting method | Direct start |
| |
Dimension | L × W × H | 3,960×3,200×3,700 mm |
|
Inlet pipe dimension (DN) | 100mm | 2sets | |
Outlet pipe dimension (DN) | 125mm |
| |
Material | Motor | Fully enclosed anti- water type |
|
Fan | Aluminum alloy |
| |
Panel, air stack | F.R.P&ABS&G.I. |
| |
Water basin, suction tank | |||
Sprinkler system | |||
Couple | SUS shaft |
| |
In fill | P.V.C | Fire-resistance type | |
Motor support, framework | Hot-dip galvanized steel | Comply with BS EN ISO1461:1999 standard |
Parts
| Parts | Material | Remark |
Water Basin | F.R.P | Water-resistance resin and high quality fiberglass mat |
Casing | F.R.P | Water-resistance resin and high quality fiberglass mat |
| Motor | Cast Iron | Fully enclosed anti water type(TEFC), other brand motors for optional |
| Motor support | Hot dip galvanized steel | In accordance with BS EN ISO1461:1999 standard |
Fan | A.B.S | Aluminum alloy material multi-blades low fan |
Driven system | Hot dip galvanized steel | Belts and pulley or Gear reducer |
Infill | P.V.C film | Hanging up type film fill with integrated drift eliminator, UPC, PP material as optional |
Flame work | Hot dip galvanized steel | Stainless steel 304, 316 for optional |
Water distributing system | F.R.P. | Top water distributing water basing |
Eliminator | P.V.C | PVC blade type eliminators e |
Bolts & Nuts | Electroplated | Stainless steel 304, 316 for optional |
