Active Member
|
[China]
Address: Room 1308, Building 3, Yabao International Building, at the intersection of Jinshui East Road and Xinyi Road, Zhengzhou
Contact name:Alios Lee
Henan Shuangxin Fire Environmental Protection Equipment Manufacturing Co., Ltd. |
|
|
* Manual control type
* Normally open, the valve will close after the break-down of fuse
when the temperature reaches high degrees , stop the smoke to
extend along the air duct.
* It can work as a volume control damper when open to adjust the
air volume. The blade is reset by manually.
| Fire damper performance parameter table | ||||
| Serial number | name | performance parameters | ||
| 1 | Standard flange specifications | Valve long side b or diameter D (mm) | Flange side width (mm) | |
| D≤280 | 20 | |||
| 280≤D≤630,b≤630 | 25 | |||
| 630＜D1250,630＜b≤1250 | 30 | |||
| 1250＜D≤2000,1500＜b≤2500 | 40 | |||
| D＞2000,2500＜b≤4000 | 50 | |||
| 2 | Temperature sensor | valve static nominal operating temperature 70℃ (valve closes automatically) | ||
| 3 | Material | Valve body | 2~3mmQ235-A | |
| Bles | 2mm708-88 Cold rolled plate | |||
| Axshaft | GB905-82 Cold pull round steel Ф12 | |||
| Axft sleeve | Oil-containing metallurgical powder copper sleeve | |||
| 4 | Local resistance coefficient | Resistance coefficient of ≤ 0.5 at full opening | ||
| 5 | Paint treatment | Ground floor rust proof primer (second floor), outer fire proof paint (medium ash steel paint) | ||
| 6 | Rated voltage | DC24V±10% | ||
| Rated current | 0.7A | |||
| Micro switch | AC380V,3A | |||
| Torque | 10~70Kg.f/cm | |||
| Action mode | automatic, electric, manual or 70℃ to close the valve | |||
| 7 | Fire control valve | Reset method (open state) | Manual reset | |
| Smoke and fire control valve | Manual reset | |||
| Smoke and fire damper | Manual reset | |||
| Remote control smoke and fire damper | Remote control manual reset | |||
| Automatic reset fire damper | Electric reset | |||
| 8 | Air leakage | In the standard state, when the pressure difference on both sides of the valve is 500Pa after the valve is closed, no more than 700mm³/㎡/h | ||
