Active Member
|
[China]
Address: No.8, Optoelectronic park street No.2, Zuoling, Hongshan district, Wuhan, Hubei province, China.
Contact name:Geng
Wuhan Weiruo Communication Tech. Co.,Ltd |
|
|
1. A steel wire (including possible PE bedding) is located in the center of the whole cable as its reinforcing member.
2.250μm single-mode fiber is located in a loose sleeve made of PBT plastic, and the gap in the loose sleeve tube is filled with a thixovariant paste compound.
3. The twisted layer is twisted around the central reinforcing member with appropriate pitch by the loose sleeve with the same outer diameter (including possible filling rope). The twisted layer is covered with short pitch yarn and water-blocking material, which is used to stabilize the structure of the twisted layer and provide effective water-blocking performance.
4. A corrugated steel-plastic composite belt with waterproof material and longitudinal lap is applied outside the cable core, and a black polyethylene sheath or other materials such as low-smoke halogen-free polyolefin are extruded at the same time.
Characteristics :
· Good mechanical and temperature performance
· High strength loose tube that is hydrolysis resistant
· Special tube filling compound ensure a critical protection of
fiber
· Crush resistance and flexibility
· PE/LSZH sheath protects cable from ultraviolet radiation
· 100% cable core filling
Description:
1.250μm Coloured Fiber
2.PBT loose Tube
3.Tube Filling Compound(Gel)
4.PSP corrugated steel tape armored
5.PE Outer Sheath
Structure and Technical specifications of GYTA 53 single mode GYTA GYTS 24 core fiber optical optic cable
G.652D Single Mode Optical Fiber (B1.3) | |||
Item | Standard | Unit | |
Attenuation | 1310nm | ≤0.35 | dB/km |
1383nm | ≤0.33 | dB/km | |
1550nm | ≤0.21 | dB/km | |
1625nm | ≤0.24 | dB/km | |
Dispersion | 1288nm～1339nm | |D|≤3.4 | ps/(nm·km) |
1271nm～1360nm | |D|≤5.3 | ps/(nm·km) | |
1550nm | ≤17.8 | ps/(nm·km) | |
Zero-dispersion wavelength | 1300～1322 | (nm) | |
Zero-dispersion slope | ≤0.091 | ps/(nm2•km) | |
PMD | PMD single fiber | ≤0.15 | ps/√km |
PMD Q links | ≤0.08 | ps/√km | |
MDF | 1310nm | 9.2±0.4 | um |
Cladding diameter | 125±1.0 | μm | |
Cladding non-circularity | ≤0.8 | % | |
Core-cladding concentricity error | ≤0.6 | μm | |
Coating diameter | 245±10 | μm | |
Cladding/coating concentricity error | ≤10.0 | μm | |
Cut-off wavelength | 1.18～1.33 | μm | |
Macrobend attenuation (ф 50mm, 100 cycles) | 1550nm | ≤0.05 | dB |
1625nm | ≤0.05 | dB | |
Bending radius | ≥5 | m | |
Dynamic fatigue parameters | ≥20 | nd | |
Additional Attenuation @1310nm & @1550nm | Temperature cycling test: (-60℃～85℃, 3 cycles) | ≤0.03 | dB/km |
Water soak test: (23℃ for 30 days) | ≤0.03 | dB/km | |
Damp heat test: (85℃, 85%RH for 30 days) | ≤0.03 | dB/km | |
Thermal aging test (85℃ for 30 days) | ≤0.03 | dB/km | |
Warm water soak test: (60℃ for 15 days) | ≤0.03 | dB/km | |
| Mechanical Performance | |
| Max Tension Performance | IEC 60794–1-2-E |
| Max. Operation Tension | IEC 60794–1-2-E1 |
| Crush Test | IEC 6079 –1-2-E3 |
| Impact Test | IEC 60794–1-2-E4 |
| Repeated Bending | IEC 60794–1-2-E6 |
| Torsion Test | IEC 60794–1-2-E7 |
| Cable bend | IEC 60794–1-2-E11A |
| Attenuation Coefficient | ITU-T G.652 |
| Structural Test | IEC-60793-1-20 |
| Environmental Performance | |
| Temperature Cycling | IEC 60794–1-2-F1 |
| Water Penetration | IEC 60794–1–2-F5B |
| Filing Compound Flow | IEC 60794-1-E14 |
