Active Member
|
[China]
Address: 4th Floor of No. 2 Gate, Hiconics Industrial Park, No.6 Fozuling Third Road, Optics Valley of China, Wuhan, China (430205)
Contact name:Collins Zhang
Wuhan Lead Laser Co., Ltd. |
|
|
200W CO2 Laser Engraving And Cutting Machine For Acrylic And Wooden Materials
Product Features:
LD-CO2-EC-200 laser engraving and cutting machine, all adopt integrating optics design, contact with engraving and cutting software, special cutting software, specialty add-reduce speed control technology,to make the product by machine more smoothness .can design figure by computer at will.
Applications & Materials:
Laser engraving and cutting machine can be used in wood, bamboo, glass and crystal, plexiglass, leather, cloth and non-metal materials .engraving high speed and accuracy. Widely used in the advertising and decoration industry, the labeling and identifying trade, the fabrication of architectural models, the fabrication of archaized bamboo slips, the clothing and leather industry, especially a batch production, the fabrication of artworks and gifts
Technical Data:
| Max. Laser Average Power | 200W |
| Laser Source | Hermitic And Detached CO2 Laser Tube |
| Laser Wavelength | 1064nm |
| Working Range | 1200x900mm |
| Marking Speed | 1500mm/S |
| Repeat Accuracy | ± 0.025mm |
| Min. Character Size | 1X1mm |
| Resolution | 4500dpi |
| Cutting Thickness | 10mm (according the different materials) |
| Cooler | Air cooling |
| Electrical Source | 220V /single-phage/50Hz/20A |
| Compatible Software | Photoshop, AutoCAD, Coreldraw |
Setting Parameter for LD-EC-CO2-200 Laser cutting and engraving machine
For Cutting methods:
1) Acrylic pieces:
| Depth of material | Cutting Speed parameter | Electronic current |
| 3mm | 12 | 13mA |
| 5mm | 8 | 15mA |
| 8mm | 3 | 17mA |
| 10mm | 1.5 | 19mA |
2) Wooden blocks:
| Depth of material | Cutting Speed parameter | Electronic current |
| 3mm | 10 | 15mA |
| 5mm | 7 | 15mA |
| 10mm | 5 | 19mA |
Remark: Inflatable must be open to the maximum when take the cutting works.
For Engraving methods:
1) Plexiglass
| Character size | Engraving Speed | Electronic current | Scan distance |
| ≤3mm | 300ms | 6mA | 0.04 |
| ≥3mm | 500ms | 8mA | 0.08—0.1 |
2) Duotone blocks
| Character size | Engraving Speed | Electronic current | Scan distance |
| ≤3mm | 300ms | 5--6mA | 0.04 |
| ≥3mm | 400ms | 7mA | 0.08—0.1 |
Remark: Other pieces of the same material can also be processed in accordance with the above parameters for processing, When take the engraving process, the blowing can be properly reduced, but can not open blowing!
