|
[China]
Trade Verify
Address: NO.28 XINCHUN ROAD JINDONG INDUSTRIAL PARK CHANGZHOU CITY, JIANGSU PROVINCE, CHINA
Contact name:James
Jiangsu Zhongxinhe New Material Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
2mm White EPE Foam For Floating Flooring With Silver Foil For Noise Proofing
Introduction:
EPE is a basic type of flooring underlay, it is an important
moisture barrier and cushioning, it is also a very important
ingredient in producing a floor with a quality sound. With foil
backing will increase the property of thermal plus.
Suitable area:
Laminate floor, wood floor, engineered floor, hardwood floor,
floating floor, sub-floors, etc.
Features:
Creates a vapor/moisture resistant floor
Meets minimum requirements for most brands of flooring
Mold and mildew resistant
Includes adhesive strip and overlap film for linking multiple rolls
cushions flooring
| Name | EPE foam silver laminate floor underlay | ||||||
| Usesage | Used for under flooring (wood floor,pvc floor,laminate floor),either floated or for cushioning, insulation,and | ||||||
| sound proofing with secret nailed installations. | |||||||
| Materials: | EPE foam is a protective and cushioning material. | ||||||
| Thickness: | 2mm | ||||||
| Color: | Whtie | ||||||
| Size: | 1.1mx16.9m or 1mx20m or custom made | ||||||
| Feature: | 1. Waterproor,good breathability | ||||||
| 2. Softly handle, good tearing strength | |||||||
| 3. Light weight ,good flexibility,and cushioning | |||||||
| 4. Invariable if it is attacked repeatedly,good highly resistant to shock. | |||||||
| 5. Isolated bubble structure, less ,low thermal conductivity and superior heat insulation | |||||||
| 6. 100%sealed chamber,good sound-absorbing, Noise prevention. | |||||||
How to Install
Step 1: Clean Your Subfloor
Clean your subfloor using your broom and dustpan so that it is free
of any foreign objects.
Step 2: Roll Out Your Underlayment
Roll your underlayment next to the wall. Start in the corner to
keep it as even as possible across the room.
Step 3: Cut the Section
Once you have your underlayment firmly in place, cut the section
using your scissors or utility knife.
Step 4: Roll Out the Next Section
Roll out the next section with the tape side over the overlapping
film on the previous section.
Step 5: Butt Underlayment
Butt your underlayment sections together so that the tape side is
flush up against the other piece of underlayment and on top of the
overlapping film.
Step 6: Cut Section
Cut the next section of underlayment.
