Small 11KW Big Power Marble Floor Grinding Machine For Rental Business

11KW Big Power Marble Floor Grinding Machine for Rental Business

HW-G7, 15hp, for 380v, three phrase, 4 square plates, 12 pcs of diamond tools. It is 700mm grinding width, suitable for grinding and polishing  large area. Square gear box is much easier to maintain, automatic pressure adjustable system and 4 heads can make your work 30%-40% more efficient than other kinds, the labor cost will be saved a lot.

Application:

Removing adhesive residues, mastics, epoxies, urethane, paint and thick coatings;

Smoothing or flattening concrete slabs–including curled expansion joints;

Removing surface imperfections and contaminants.

Parameters:

Features

Big size, 15p, very suitable for large area;

IE2 high standard energy-efficient motor which is made of pure copper wires;

Aluminum alloy gear box, light but solid;

Easy and comfortable to operate machine;

Can be connected to industrial vacuum.

Product Details

1,Using a stable transmission device. the front fuselage is connected to gear box directly, so the motor power can be 100% transmitted. When motor runs in low speed, the transmissiondevice enhances the torque of the rotating shaft. Which improves the grinding and polishing effect in different floors.

2,High strength aluminum alloy (gear box, solid strong, good for heat radiation). When the gears work for a few hours the enclosed gear box will get pressed and hot. The aluminum alloy is good for heat radiation.

3,Motor and gear box are directly connected reducing the machine’ s vibration, noise, at the same time, increases the flatness after grinding.

4,Grinding width is 700MM, the similar products in the market are commonly 580mm wide, increasing the productivity as well as saving labor cost.

Closer Look

After Sell Service

1. One year of warranty for machine.
2. In the warranty period, the spare parts are sent by DHL, which is paid by Honway Company.
3. Out of warranty period, the spare parts are sent by DHL, which is paid by customer.
4. Honway always store the spare parts of old models, in case that the machine needs repair in future.
5. All gear boxes are tested 48 hours before it leaves factory.
6. We could send the technologists to distributors, for training the after sell service staff and maintenance issues.

FAQ

Q: If you are a trader company or the real manufacturer?
A:Honway is a real manufacturer. It is located in Changsha, Hunan province. Welcome you come to our factory and produce process at any time.

Q: What is your MOQ?
A: 1 set

Q: What is your packaging?
A: We package in Plywood case.

Q: What is your main market?

A: USA, Australia, Asia