4KW 220V 380V Terrazzo Floor Polishing Machine 400 Grinding Width Motor Driven

Terrazzo Floor Grinding Machines 380V Wet and Dry Grinding

HW-G2 is a versatile and very productive single disc floor grinder for a wide range of applications. With its 400 mm wide grinding width it efficiently grinds medium to large concrete areas. It is easy to transport due to its compact and foldable frame. The machine is designed to facilitate an ergonomic work position and is easy and convenient to use.

Application:

Grinding adhesives, paint, epoxy and spackle on the concrete floor.

Parameters

Advantages

Self-adjusting floating cover with brush list follows the surface and gives a tight seal to prevent the dust from entering the working environment;

Schneider electrical elements, international brand;

Compacted structure, easy to transport and set up;

Robust stamping parts afford more the machine vibration;

The speed is fixed and no settings are required;

The machine also has an user-friendly logical control panel with overload protection.

Closer Look

Company introduction

After Sell Service

1. One year of warranty for machine.
2. Honway always store the spare parts of old models, in case that the machine needs repair in future.
3. The spare parts can be sent out immediately at any time, delivered by DHL.
4. Honway will service you and your machines for years.
5. All gear boxes are tested 48 hours before it leaves factory.
6. If the customers visit our factory, we could provide the training lessons.
7. We always supply the spare parts for all the old models.

FAQ

Q: How about the floating cover of HW-G2?

A: The floating cover follow floor up and down, preventing dust from entering work site.

Q: If the machine vibrates when it works?

A: HW-G2 has a chassis which is made of triangle structure. It is more stable and less anti-vibrate. Besides, the machine frame is made of steel tubes, not steel plate, so it could support machine more and decrease vibration.

Q: What is the brand of motor and electrical element?

A:The motor is from the old motor factory over 50 years. Honway uses it since the factory is built up. The motor is made up of pure copper coils and the fault rate is below 0.5%; The electrical elements are Schneider, world brand. The brand of buttons is Dehli, famous China brand.