Home Companies Changsha Honway Machinery Co., Ltd.

Removing Epoxy Industrial Floor Grinder Diamond Grinding Machine 7.6A Current

Changsha Honway Machinery Co., Ltd.
Active Member

Contact Us

[China] country

Address: C2-05, Gold Industrial Park, No.1389, Leifeng Avenue, Changsha, Hunan, China

Contact name:Manli Chang

Inquir Now

Changsha Honway Machinery Co., Ltd.

Removing Epoxy Industrial Floor Grinder Diamond Grinding Machine 7.6A Current

Country/Region china
City & Province changsha hunan
InquireNow

Product Details

 

Industrial Floor Grinder For Remove Epoxy

 

 

 

HW-G2 is a single head grinder with the high motor rate, for 380v, three phrase; It is usually used for coarse grinding instead of the gear or belt driven floor grinding machines, as th latter is too heavy for it sometimes; in case that the gear or belt driven floor grinder is hit by the rebar underneath the floor,(which happens very often), HW-G2 is good choice for it; even it is hit, the maintenance is much easier than the big floor grinding machine;

 

 

Parameters

 

 

ModelHW-G2
Voltage:380V three phrase
Power output:4KW,5.5hp
Motor Speed:1400rmp
Frequency:50/60HZ
Current:13A
Grinding Width:400mm/15.7”
Grinding Pressure:69KG/152lbs
Additional Weight:N/A
Dust Port:Φ50mm
NO.of grinding plateSingle one
Diamond Pad Holder:8 Pieces
Machine L*W*H:760*420*1200mm
Package L*W*H:800*450*1000mm
Net Weight:95KG/205lbs

 

 

 

Advantages

 

Strong stamping parts make the machine more durable;
Use the hammer to change the diamond pads;

Floating dust cover make less dust enter into the project site;

Single heads grinding plate is more productive;

 

 

 

 

Closer Look

 

 

 

 

 

 

Package

 

 

 

 

 

 

 

After Sell Service

  1. One year of warranty for machine.
  2. Honway always store the spare parts of old models, in case that the machine needs repair in future.
  3. The spare parts can be sent out immediately at any time, delivered by DHL.
  4. Honway will service you and your machines for years.
  5. All gear boxes are tested 48 hours before it leaves factory.
  6. If the customers visit our factory, we could provide the training lessons.
  7. We always supply the spare parts for all the old models.

 

 

 

FAQ

 

Q: How about the floating cover of HW-G2?

A: The floating cover follow floor up and down, preventing dust from entering work site.

 

Q: If the machine vibrates when it works?

A: HW-G2 has a chassis which is made of triangle structure. It is more stable and less anti-vibrate. Besides, the machine frame is made of steel tubes, not steel plate, so it could support machine more and decrease vibration.

 

Q: What is the brand of motor and electrical element?

A:The motor is from the old motor factory over 50 years. Honway uses it since the factory is built up. The motor is made up of pure copper coils and the fault rate is below 0.5%; The electrical elements are Schneider, world brand. The brand of buttons is Dehli, famous China brand.

 

Hot Products

Industrial Floor Grinder For Floor Levelling HW-G7, 15hp, for 380v, three phrase, 4 square plate, 12 ...
Planetary Industrial Floor Grinder Gear Driven HW-G8,15hp motor, grinding width 750mm, for 220v or ...
Industrial Floor Grinder For Commerical and Residential Floor G10 is 650mm, 11hp, for 220v or 380v, ...
Small Industrial Floor Grinder For Home Grinding HW-G1 not only grinds the floor, but also grinds ...
Industrial Floor Grinder For Remove Epoxy HW-G2 is a single head grinder with the high motor rate, ...
Industrial Floor Grinder To Polish Concrete Floor HW-G3, grinding width 500mm, with dual heads, is ...