Home Companies Flo-Instruments Co., Ltd

SE603 Separate Ultrasonic Energy Meter 24V DC

Flo-Instruments Co., Ltd

Contact Us

[China] country

Trade Verify

Address: 2F, Rongxing Building,No.1007 Banxuegang Avenue, Bantian Street, Longgang District, Shenzhen, 518129 Guangdong, China.

Contact name:

Inquir Now

Flo-Instruments Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

SE603 Separate Ultrasonic Energy Meter 24V DC

Country/Region china
City & Province shenzhen guangdong
Categories Instrument Parts & Accessories
InquireNow

Product Details

SE603 Separate Ultrasonic Energy Flowmeter

Clamp-on simple type ultrasonic flow meters.

 

Introduction

SE603 ultrasonic energy meter used widely in flow and energy measurement is based on state-of-the-art TVT technology, which fully meets the new standards for energy and environmental savings.

In particular, it allows accurate measurement of heat and cooling energy in which water is the heat transfer fluid. It is specifically adapted to the residential and industrial sectors: low-cost housing, condominiums, buildings, individual houses, factories, cities, neighbourhoods, etc.

The meter has remote reading functionalities in order to better monitor energy consumption. It allows communication according to RS485 Modbus standards.The ultrasonic technology eliminates a large part of the pressure losses, which ensures a very wide measuring range.

The advantage of ultrasonic measurement is that there are no moving parts in contact with the fluid, which gives the device a long service life.

 

Main Features

  • No Pipe Modification Necessary,No Special Tool Needed

The difficulties commonly associated with installing a new ultrasonic flow meter are eliminated by simple CLAMP-ON.This design eliminates the need to cut pipe, shut down pipe running, stop production, and reduce additional costs etc. Easy and simple installation can be achieved by a single Phillips-head screw driver without any special tools.

  • Energy Measurement

The measurement accuracy of PT1000 temperature sensor is very high, which can reach ±0.1℃, ±0.2℃, ±0.5℃ and it can measurement energy through the temperature differences from temperature sensors at inlet water and outlet water.

  • Hook and Snap-On Installation

The main unit(display screen) has a very special and easy installation. Method 1, just hang it by hook hole of the top and bottom on the wall or on the pipeline etc; Method 2, its back has snap-on design. It can be easily installed by just clamping it on the rail in the power distribution cabinet or somewhere that can accommodate the buckle on its back.

 

Working Principle

SE603 is a separete and clamp-on ultrasonic energy meter, specially designed for meeting the small/medium/large pipe size. It is very easy and simple in seting-up and installation. The product developed by adopting the ultrasonic principle of transit-time difference method sends and receives ultrasonic signals through the sensor. When the ultrasonic signal is transmitted and received through the moving liquid, there will be a difference between upstream and downstream transit-time, which can be used to calculating flow and velocity. Samely, based on PT1000 temperature sensor, SE603 can display energy measurement through the temperature differences from temperature sensors at inlet water and outlet water.

 

Specifications

Performance Index
Flow Range±0.1m/s ~ ±5m/s(±0.328ft/s ~ ±16ft/s)
AccuracyValued ±2%
Repeatability0.40%

Pipe Diameter

Range(Optional)

OD15~OD110
Measuring MediumRegular water, sea water, cooling/hot water,alcohol...
Pipe Material(Optional)PVC, stainless steel, carbon steel, copper...
Function Index
Communication InterfaceRS485 communication interface, support Modbus protocol
Power Supply24V DC
Keyboard4 touch keys
DisplayIn-built Backlit OLED 128*64 dot-matrix displays
TemperatureTransmitter ambient temperature: 32℉~122℉(0℃~50℃)
Transducer measurement medium: 32℉~176℉(0℃~80℃)
RTD measuring: 35.6℉~221℉(2℃~105℃)
HumidityRH 0~95% RH,non-condensing
IPIP54
Working Pressure1.6MPa
Physical Characteristics
TransmitterAluminum alloy
SensorClamp-on
CableStandard length: 6.6ft (2m)
 
Statistical table of applicable range of pipe clamp for clamp on

 

DNODOD RangeInchFlow Range
DN10OD1514.5mm-15.4mm3/8"0.026~1.282 m³/h
0.427~21.366 l/min
0.113~5.644 gal/mir
DN15OD2016.5mm-23.0mm1/2"0.046~2.279 m/h
0.760~37.984 l/min
0.201~10.034 gal/min
DN20OD2525.0mm-30.0mm3/4"0.103~5.128 m/h
1.709~85.464 l/min
0.452~22.577 gal/min
DN25OD3232.0mm-35.0mm1"0.182~9.116 m³/h
3.039~151.935 l/min
0.803~40.137 gal/min
DN32OD4038.0mm-45.0mm1-1/4"0.285~14.244 m³/h
4.748~237.399 l/min
1.254~62.714 gal/min
DN40OD5048.0mm-54.0mm1-1/2"0.410~20.511 m³/h
6.837~341.854 l/min
1.806~90.309 gal/min
DN50OD6358.0mm-64.0mm2"0.729~36.464 m³/h
12.155~607.741 l/min
3.211~160549 gal/mir
DN65OD7572.0mm-78.0mm2-1/2"1.140~56.976 m³/h
18.992~949.595 I/min
5.017~250.857 gal/mir
DN80OD9080.0mm-92.0mm3"1.641~82.045 m/h
27.348~1367.417 l/min
7.225~361.234 gal/mir
DN100OD110108.0mm-116.0mm4"2.917~145.858 m³/h
48.619~2430.963 I/min
12.844~642.194 gal/min

 

 

 

 

Hot Products

SE603 Separate Ultrasonic Energy Flowmeter Clamp-on simple type ultrasonic flow meters. Introduction ...
SE603 Separate Ultrasonic Energy Flowmeter Clamp-on simple type ultrasonic flow meters. Introduction ...
SE603 Separate Ultrasonic Energy Flowmeter Clamp-on simple type ultrasonic flow meters. Introduction ...
SE603 Separate Ultrasonic Energy Flowmeter Clamp-on simple type ultrasonic flow meters. Introduction ...
SE603 Separate Ultrasonic Energy Flowmeter Clamp-on simple type ultrasonic flow meters. Introduction ...
SE603 Separate Ultrasonic Energy Flowmeter Clamp-on simple type ultrasonic flow meters. Introduction ...