Automatic Corrugated Carton Cardboard Flexo Printing Die Cutting Machine

Automatic Corrugated Carton Cardboard Flexo Printing Die Cutting Machine

Quality: Due to high requirements for mechanical quality, raw materials selection, processing, assembly of industrial control over the industry standard, using the new design, quality management system, comprehensive tracking to every detail, delivery to the customer in both hardware and software are a high quality equipment.

Main Technology parameters

Function and advantages

1. Machine units move by motorized, locked by pneumatic control, with button to operate, convinient.
2. PLC with touch screen design, Input carton size(length, width, height) on the touch screen, computer can restore and adjust size automatically, improve product effective.
3. Advanced lead edge feeder with sunction system, feed automatically and sunccessfully.
4. Latest design for rotary die-cutter unit, it with slotting ring instead wooden die to make RSC carton, save cost.
5. Hang plate device, cooperate with the ratchet shaft fixed volume board fix printing plate fast.
6. Pneumatic lift-down mechanism on anilox roller(while feeding, the anilox roll go down automatically; stop feeding, it go up automatically )
7. The machine adopts sealed spray lubrication for gear system, engineer oil automatic balance device; keep the oil level equal in each unit.
Feeder:

1. Leading edge feeding paper system, simple operation, high precision. Gear of gear box adopts the same grade material with vehicle transmission.
2. The 7.5kw high pressure centrifugal fan, can control wind pressure with frequency conversion according to the cardboard warp degree, ensure the warp and thin cardboard transmit fast and accurately.
3. About side clapboard position is drived by lead screw electric adjustment.
4. In front clapboard upper and lower gap position, synchronization regulation is optional.
5. With the paper-feeding partition device, you can choose partition feeding paper according to need, to guarantee larger specification cardboard can also be processed.
6. Slotting department is loaded with interconnection controlling switch, which can realize sudden stop, stop feeding or return feeding.

Printer:

1. The phase is 360°adjusted by electric wheel planetary, keyless connection
   Foot switch is installed, and convenient to load and unload.
2. The plate roller axial can be adjusted position by electrically and manually, move range:0-10mm.
3. Good quality metal anilox roller manufactured by professional factory.
4. Drum-type rubber roller manufactured by professional factory ensures the quality of ink distribution.
5. Pneumatic circular ink-supplying system.
6. Optional for ceramic anilox roller.
7. Max printing area:1200*2600mm
8. Whole plate hang plate, suitable for standard plate strips.

Slotter:

1. With pre-creasing wheels for prevent the cardboard rupture while creasing.
2. Single axis dual blade slot, four blade increase simultaneously the case height.
3. The phase of slotting unit adopts electric digital input type 360°adjust, also can be adjusted while the machine running or stop.(PLC and touch screen adjustment is optional)
4. Slotting tool apron and creasing wheel horizontal moving adopts electric synchronous adjustment.
5. Creasing space and blade roller space adjustment adopts self-lock structure.
6. The case height adjustment has an anticollision device for slotting blade, will not destroy the machine.
7. An anticollision device is used while slotting tool apron horizontal moving.
8. The width of slotting blade is 7mm, adopts alloy steel material and after heat treatment and grinded, gear slotting knife, douple-piece type cutting knife, sharp edge, and high precision.

Die-cutting:

1. Youli cushion imported from Taiwan.
2. Double-warm abrasive belt cushion correction facility.
3. Cushion axial floating automatically to improve the utilization rate of cushion.
4. range of floating is 0-20mm(from middle to left or right)
5. Speed difference self-compensating function.
6. The axial adjustment of platen roller is electric/manual, range:0-20mm(left to right )
7. Die-cutting phase is adjusted by electric planet gears, keyless junction.