Configuration Table of Computer Stamping Die Cutting Machine (Model
HJ-1600T)
Technical parameters:
1. Maximum hot stamping gold area: 1600 * 1250
2. Working speed: 15 ± 2
3. Working pressure: ≤ 200 (T)
4. Foil feeding length: 1250 (mm)
5. Net weight: 10000kg
6. Number of foil feeding groups: 3 groups
7. Host power: 11KW
8. Total power: 50kw
1. The casting of the machine is HT250 Gray iron, which is
annealed. It can make the castings of the machine (including the
body, press frame, etc.) less prone to deformation and fracture.
2. The main shaft of the machine is made of four phosphorus
chromium steel, which is then quenched and tempered. It can make
the spindle less prone to deformation and improve its strength,
rigidity, and hardness.
3. The main gears of the machine are also made of four phosphorus
chromium steel, which is then quenched and tempered.
4. The guide rail lining of the machine is made of 38 chromium
molybdenum aluminum, which is then nitrided. It greatly enhances
its hardness and is less prone to wear and tear. It can keep the
pressure of the machine in balance and not easily change.
5. The key parts of the machine use NSK bearings as bearings.
6. The machine adopts a centralized refueling lubrication system,
which can better ensure the smoothness of the oil circuit. Make the
maintenance and refueling of the machine more convenient.
7. The shaft sleeve of the machine is made of pure copper sleeve.
Make the machine more precise.
8. The lining of the machine is made of stainless steel plate.
The key and main components of the above machines will not be
explained separately.
