JIANGSU ESTY BUILDING MATERIALS CO.,LTD |
|
Brief Introduction of Installation
(1)the requirements of foundation
1.The ground should be waterstone ground, ceramic tile ground,
wooden ground or cement ground.
2.The ground should be smooth and level. Its unflatness should be
less than 0.2%.
3.The ground should have enough strength and no the phenomenon of
sand coming out and separation.
4.The ground should be dry. It is necessary for a new ground to dry
about 30days
(2)Procedure of construction
Clean the ground - spread the earthing conductive net-lead out the
earthing line-coat strong adhesive-coat conductive adhesive-lay
floor-welding floor-cleaning-inspect properties
(3)Maintenance of floor
Technical Data | Test Method | Test Results | |
1 | Size | EN426 | 600 x 600mm, 900 x 900mm |
2 | Thickness | EN426 | 2.0mm, 3.0mm |
3 | Weight | EN430 | 3.8kg / 5.7kg |
4 |
Electric Properties | DIN51953 ASTM F-150 OR NFPA99 | Antistatic Tile: 10^6~10^9 ohm |
5 | Conductive Tile: 10^4~10^6 ohm | ||
6 | Decay Time | SJ/T10694-2006(±1000V±100V≤2s) | <0.3S |
7 | Charge Voltage | SJ/T10694-2006(ⅠVⅠ<100V) | 70V |
8 | Fire Resistance | DIN4102 | B1 |
9 | Combustion Properties | SJ/T11236-2001(<10S,reach FV-0) | 0.35IFV-0 |
10 | Amount of Anti Wear | SJ/T11236-2001(≤0.020g/cm 21000r) | <0.014 |
11 | Anti Wear Properties | EN660pt2 | ITEN-T<2.0mm3 |
12 | Wheel Pressure | EN425 | No influence |
13 | Residual Conavity | EN433/DIN51955 | 0.03mm |
14 | Dimension Stability | ≤0.10% | |
15 | Color Fastness | ISO105BO2 | >6 |
thickness | packing details |
2mm | 28pcs/box ,32-36box/pallets,13pallests/20GP,4500sqm/20GP |
3mm | 28pcs/box ,30-32box/pallets,13pallests/20GP,3200sqm/20GP |