Active Member
|
[China]
Address: Building 1, Xuqiao Village, Haiyu Town (Fushan), Changshu City, Jiangsu Province 215500
Contact name:Jessica lee
Changshu Changhua Zhizao Technology Co., Ltd. |
|
|
Polo Collar Single System 80inch 12G Flat Knitting Machine Sale
PRODUCT DESCRIPTION:
Flat knitting is a method for producing knitted fabrics in which the work is turned periodically, i.e., the fabric is worked with alternating sides facing the knitter.
Another method of reaching the same result is to knit alternately from right to left and left to right without turning; this back-and-forth technique requires either innate or learned ambidextrous motor skills. The two sides (or "faces") of the fabric are usually designated as the right side (the side that faces outwards, towards the viewer and away from the wearer's body) and the wrong side (the side that faces inwards, away from the viewer and towards the wearer's body).
PRODUCT FEATURES:
| Gauge | 5G,7G,9G,10G,12G,14G,16G |
| Knitting width | 52,60,72,80,100inch |
| Knitting system | Single system |
| Knitting function | Stitch Trasfer, independent suspension,pointelle,intarsia,jacquard,apparent or hide shaping and other regular or inregular patterns. However, the front needle plate can be used for hanging the eyes, and the back needle plate can be used for knitting. It is not allowed to hang the eyes on one needle plate at the same time. |
| Knitting speed | Controlled by servo motor with 32 sections optional, Max 1.2M/S.The serve motor combines precise feedback control system with high-speed digital signal processor(DSP)to control IGBT to achieve accurate electric current output. |
| Racking system | Controlled by AC servo-motor,racking within 2 inches an with fine adjusting function. |
| Stitch density | Controlled by stepping motor, 32 sections stitch selectable adjustable scopesupported by subdivision technology: 0-650, the length of the knitwear can be accurately controlled. |
| Stitch transfer | Triangular integrated designing enables independent or simultaneous stitch transfer to realize more efficient production. |
| Roller system | Infrared alarm,Computer programs instruction, stepper motor control,32-stagetension selection with an adjustable range between 0-100. |
| Yarn carrier | 3 guide rails and 6 nozzles,shiftable at any postion of the needle bed. |
| Protection system | The machine alarm system will set off when yarn-breaking, knots, floating yarn,rewinding, end of knitting, racking failure, needle breakage or Program error, also set up the safety auto-lock protect device. |
| Control system | 1. LCD touch screen, graphical interface.USB and network compatible,with expanded memory of up to 2G.A great amount of patterns can bestores and mobilized for use at any time as perproduction requirements. 2. Monitoring display:Various operating parameters can be displayed and can be adjusted anytime when the machine is running,making operations as convenient and time-saving as possible. 3. Design system and control system(software)are easy to update for free. 4. Multi-language operating system:There are Chinese,English,Spanish andArabic Versions.Languages can be switched according to customer requirements. |
| Network function | High speed network can coordinate up to 250 machines；the knitting data can be uploaded downloaded and shared. |
| Power | Single-phase 110V/220V/three-phase 380V,adopt advanced CMOS technology,having memorizing function at power shock stop.(Optional British plug) |
PRODUCT DETAILS
Guide rail: The guide rail is made of castings or special steel. It is fastened to the frame with fixing screws. Generally, there are two front and rear, which are the rails for the machine head. There is a yarn feeder guide above the rear guide rail, which is mainly used for It is used when the yarn feeder moves smoothly left and right with the random head or when changing the yarn feeder.
Rack: There are two hills, and two beams connect the hills into a whole, which is a casting. A wrench, a wrench fixing screw, a needle support plate screw, and a needle support plate screw compression spring are installed on the rack.
Needle plate: The steel plate is obtained by refining and heat treatment of high-quality steel, with considerable wear resistance and rust resistance. Slotted holes are milled, and there are large bead, small bead, machine needle, tofu block and fixing screws.
Faucet: the heart of the flat knitting machine, the parts of the whole machine head are installed on it, its parts include front and rear faders, pusher coke balls and screws, pusher sliders, and bearings are installed on the sliders. The front part of the faucet is equipped with a three-eye cover. The screw that passes through the three eyes is a needle-pulling triangle pull rod. The screw in the center eye is called a live-heart pull-rod screw, a pull-rod well ring and a needle-pulling triangle wrench, a live chicken heart wrench, and a machine head.
The scale plate on the surface is called the scale plate, the small green pressure plate is installed on the scale plate, and the screw in the center of the scale plate is called the two-head screw. The lower ends of the two screws are fastened to the big triangle, the center of the two screws is equipped with a pointer, and the pointer is equipped with an ingot screw. A shuttle rack is installed behind the faucet, and the shuttle rack is equipped with a swing rod and a shuttle rod, and a latch switch is also installed at the back of the machine head. The main part above the machine head is the flower plate.
Flower plate: The flower plate is the center of the flat knitting machine. It has a base plate seat and a panel structure. All triangles are installed on the base plate seat. The triangles on the flower plate include needle triangle, chicken heart triangle, herringbone triangle, and big triangle.
Yarn feeding part: used to convey wool yarn for weaving.
Lead frame part: used to thread the wool yarn output from the bobbin, which can eliminate or reduce the tension fluctuation of the wool yarn, and ensure that the two edges of the fabric are tightly and evenly stitched. It consists of thread take-up spring, adjusting nut and disc tensioner. The elastic force of the thread take-up spring is controlled by the pressing nut, and the clamping force of the disc tensioner is controlled by the adjusting nut.
Pulling mechanism: It adopts heavy hammer pulling, which is used for weaving middle opening and pulling fabric.
Notice:Do not mix the original machine needles with other types of needles on one Flat knitting machine!
APPLICATION FIELDS
PACKAGE AND TRANSPORT:
To make sure the product you buy is safe during transportation,we
use plastic package+wooden package.
In addition,we provide complete packaging methods according to your
requirement,and provide convenience for loading,uploading and
storage as well as save time for checking and delivery.
FAQ
Q1: Supplier Profile
A2: We are a flat knitting knitting machine manufacturer since
2002, with more than 60 professional technicians and many agents
around the world, the machines are exported to more than 40
countries such as India, Bangladesh, Mexico, the United States,
etc.
Q2: Product introduction
A2: Flat knitting machine is suitable for the production of
collars, sweaters, hats, scarves and other textiles. Just design
the pattern computer in the software, input the pattern to the
machine via USB, and you can knit anything you need.
Q3: Machine warranty
A3: One year. For any accessories of the machine, customers can buy
from us.
Q4: Delivery time
A4: Usually 15~30 days after payment, depending on the number of
machines and the order of the factory at that time. If the machine
you need is in stock, we can ship it quickly.
Q5: How do you ship the goods and how long does it take to arrive?
A5: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive.
Airline and sea shipping also optional.
Q6: Machine package
A6: The inner layer is plastic packaging to avoid dust; the middle
layer is vacuum packaging to avoid moisture and rust during
shipping Shipping; exterior is wood packaging and iron underframe
to protect the machine during shipping
Q:7Can the machine be customized?
A7:Yes, we can customize according to your needs, please confirm
the details with us in advance before purchasing.
Q8: After-sales service
A8: Firstly, Our products are produced in strict quality control
system and the defective rate will be less than 0.2%.
Secondly, During the warranty period, if there is any problem with
the accessories, we will send it to the customer for free (the
courier fee needs to be borne by the customer); after-sales
services can be provided (the customer needs to bear the travel
expenses of the after-sales personnel).If the product is outside
the warranty period, we can provide video assistance services, and
if there is a problem with the accessories, we sell it to the
customer at the cost price
