1350 Aluminum Sheet H/O Temper Cast OR Hot Rolling Nameplates Accept Small Order

                             1350 Aluminum Sheet H/O Temper Cast OR Hot Rolling Nameplates Accept Small Order

Description

1350Aluminum is controlled unalloyed (pure) composition, used primarily in the electrical and chemical industries.

Aluminum has a density of only 2.7 g/cm3, approximately one-third as much as steel (7.83 g/cm3).

Composition specification

Si: 0.1%

Fe:0.4%

Cu:0.05%

Mn:0.01%

Cr:0.01%

Zn:0.05%

0.03%Ga+0.05B,0.02V+Ti

Others each:0.03%

Others total:0.1%

Al:99.50%

Details of Aluminum Sheet

Alloy : 1350

Temper: O, H12, H14, H16, H18, H22, H24, H26, H28 and etc.

Thickness: 0.2mm-6.35mm

Width: 200mm-2650mm

Length: ≤12000mm

Product introduction of 1350 Aluminum Sheet

There are many differences between cast rolling aluminum sheet and hot rolling aluminum sheet. Here we’d like to specify on the following points:

1.Prices

Cast rolling is cheaper than hot rolling because of its easy production process.

2.Supply of blank product

Cast rolling: ingot-melting-strip rolling by casting and rolling mill. High production efficient, but quality is not as good as hot rolling material.

Hot rolling: ingot- melting and casting flat ingots – milling surface-homogenization annealing - hot rolling into strip.

3.Production process

Cast rolling: roll-casting coil with thickness 6-8mm (by roll-casting mill) - aluminum sheet (by cold rolling mill)

Hot rolling: aluminum flat ingot with thickness 400-500mm (under high temperature)—aluminum sheet(by hot rolling mill)

4.Properties

Hot rolling aluminum sheet has bellow characteristic:

*Good surface quality

*Strong mechanical properties and ductility

Good oxidation effect

Aluminum circles are usually processed from aluminum sheet, therefore it will be effect by the properties of aluminum sheet.

5.Applications

Cold rolling aluminum sheet are mostly used in mold class.

Hot-rolled aluminum sheet is suitable for stamping and stretching.

6.Finished product status

Generally, the elongation of cold-rolled final products is lower than that of hot-rolled final products. In addition, the surface of hot rolled products is usually brighter.

Applications of 1350 Aluminum Sheet