Home Companies ChongMing Group (HK) Int'l Co., Ltd

SN65HVD1781DR High Performance UART Interface IC 70V Fault Protected

ChongMing Group (HK) Int'l Co., Ltd
Active Member

Contact Us

[China] country

Address: Room 1204, DingCheng International Building, 518028 Futian District, SHENZHEN, CN

Contact name:Doris Guo

Inquir Now

ChongMing Group (HK) Int'l Co., Ltd

SN65HVD1781DR High Performance UART Interface IC 70V Fault Protected

Country/Region china
City & Province shenzhen
Categories Other Chargers
InquireNow

Product Details

SN65HVD1781DR UART Interface IC RS-485 Interface IC 70V Fault-Protected RS-485 Xceivers

 

1 Features

• Bus-Pin Fault Protection to:

  • – > ±70 V (SN65HVD1780, SN65HVD1781)

  • – > ±30 V (SN65HVD1782)

  • Operation With 3.3-V to 5-V Supply Range

  • ±16-kV HBM Protection on Bus Pins

  • Reduced Unit Load for Up to 320 Nodes

  • Failsafe Receiver for Open-Circuit, Short-Circuit, and Idle-Bus Conditions

  • Low Power Consumption

    • – Low Standby Supply Current, 1 μA Maximum

    • – ICC 4-mA Quiescent Current During Operation

  • Pin-Compatible With Industry-Standard SN75176

  • Signaling Rates of 115 kbps, 1 Mbps, and up to 10 Mbps

  • Create a Custom Design using the SN65HVD178x with the WEBENCH® Power Designer

 

2 Applications

  • HVAC Networks

  • Security Electronics

  • Building Automation

  • Telecommunication Equipment

  • Motion Control

  • Industrial Networks

 

3 Description

The SN65HVD178x devices are designed to survive overvoltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. The devices are also robust to ESD events with high levels of protection to the human-body-model specification.

The SN65HVD178x devices combine a differential driver and a differential receiver, which operate from a single power supply. In the SN65HVD1782, the driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. This port features a wide common- mode voltage range, making the devices suitable for multipoint applications over long cable runs. These devices are characterized from –40°C to 125°C. These devices are pin-compatible with the industry- standard SN75176 transceiver, making them drop-in upgrades in most systems.

These devices are fully compliant with ANSI TIA/EIA 485-A with a 5-V supply and can operate with a 3.3-V supply with reduced driver output voltage for low- power applications. For applications where operation is required over an extended common-mode voltage range, see the SN65HVD1785 (SLLS872) data sheet.

Device Information

PART NUMBER

PACKAGE

BODY SIZE (NOM)

SN65HVD178x

SOIC (8)

4.90 mm × 3.91 mm

PDIP (8)

9.81 mm × 6.35 mm

 

Hot Products

SN65HVD232DR UART Interface IC CAN Interface IC 3.3-V CAN TRANSCEIVER 1 Features Operates with a ...
SN65HVD251DR UART Interface IC CAN Interface IC STANDBY MODE 1 Features Drop-In Improved Replacement ...
DS80PCI810NJYR UART Interface IC Signal Buffers, Repeaters 54-WQFN -40 to 85 ​1 Features Low 70 mW...
SN65HVD22DR UART Interface IC RS-485 Interface IC Extended Common-mode Transceiver 1 Features Common...
SN65HVD1781DR UART Interface IC RS-485 Interface IC 70V Fault-Protected RS-485 Xceivers 1 Features • ...
TUSB9261IPVP UART Interface IC USB Interface IC 2nd Gen SuperSpd USB 3.0 to ATA Brdg 1 Features ...