2 Inch Isolation Gate Valve Stainless Steel Cast Steel Motor Operated

2 Inch Isolation Gate Valve Stainless Steel Cast Steel Motor Operated

 Specifications 
 

Applicable Standards:
- Gate Valve, API600
- Steel Valves, ASME B16.34
- Face to face ASME B16.10
- End Flanges ASME B16.5/ASME B16.47
- Butt Welding ends ASME B16.25
- Inspection and test API 598

Size Range:
- 1/2"~12"

Pressure Rating:
- ASME CL, 150, 300, 
Temperature Range:
- -196°C~650°C

 Application 

The opening and closing member of the gate valve is a gate. The direction of movement of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully open and fully closed, and cannot be adjusted and throttled. The gate has two sealing faces. The two sealing faces of the most common mode gate valves form a wedge shape. The wedge angle varies with the valve parameters, usually 50, and is 2°52' when the medium temperature is not high. The gate of the wedge gate valve can be made into a whole, called a rigid gate; it can also be made into a gate that can produce a small amount of deformation to improve its processability and compensate for the deviation of the sealing surface angle during the processing. The board is called a resilient shutter.

 Feature 

1. The fluid resistance is small, and the sealing surface is less washed and eroded by the medium.
2. Opening and closing is more labor-saving.
3. The flow direction of the medium is not limited, no disturbance, no pressure reduction.
4. Simple shape, short structure length, good manufacturing process and wide application range

 Model Selection 
 

Gate Valve