Active Member
|
[China]
Address: ROOM 1205, 12/F, TAI SANG BANK BUILDING, 130-132 DES VOEUX ROAD，CENTRAL, HONG KONG
Contact name:Jack young
Dongguan HOOHA Electrical Equipment Company Limited |
|
|
ISO / T 2407 : 1981 Wire Testing Equipment ZY6070 Hot Rod Method Plastic
Scope of application:
Suitable for the determination of plastic combustion performance test with hot rod.
Meet the standard:
Consistent with GB/T 2407-2008: determination of combustion characteristics of plastic hard plastic samples with hot rod contact and ISO/T 2407:1981 test standard.
Main parameters:
The test chamber volume: 1 m з. Material: for baking paint (or stainless steel), with ventilation and observation window.
Fixture: an upright bracket mounted on a sliding pedestal can be tested for different lengths of specimens.
Ignition source: hot rod with metal contact, 8mm in diameter and 100mm in length; Heated to 955 ℃ + 15 ℃; Insulation bracket: using asbestos, two fixed hot rod to ensure that the hot rod can be separated from sample when necessary.
Balancer: a force of about 003N applied to the contact of the hot rod and the test sample.
Sample screw: the hot rod can be kept in contact with the test sample until the sample is burned at about 5mm.
Positioning bar: 8mm in diameter and 150mm in length. Replace the hot rod to adjust the sample position.
The apparatus for testing hot rod temperature is stopwatch.
