|
[China]
Trade Verify
Address: F8 Xinke Road, Choujiang Street, Yiwu City, Jinhua City, Zhejiang Province
Contact name:NENE
YW DKE TRADING COMPANY |
|
Verified Suppliers
|
|
|
Excelon Micro Fog Lubricator, L72-74, Plastic Bowl Closed
R07 General purpose
Snap action knob locks pressure setting when pushed in
Standard relieving models allow reduction of outlet pressure even when the system is dead-ended
R46 Non-repairable
Wrench flats for easy installation
Relieving piston design allows reduction of downstream pressure when the system is dead-ended
Choice of left to right or right to left flow
Technical data
R07
Fluid: Compressed air, neutral gases
NOTE: Contact technical support for use with other media.
Maximum pressure
300 psig (20 bar)
Operating temperature:
-34° to 150°F (-35° to 65°C) *
* Air supply must be dry enough to avoid ice formation at temperatures below 2°C (35°F).
R46
Fluid:
Compressed air
Maximum pressure:
250 psig (17 bar)
Operating temperature*:
-30° to 150°F (-34° to 65°C)
* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C).
Materials
R07
Body: zinc
Bonnet: acetal
Knob: Acetal
Valve seat: acetal
Elastomers: nitrile
Valve: brass, nitrile
Ordering information
| Port Size | Model | Flow Scfm(dm3/s) | Weight lb (kg) |
| 1/8" | R07-100-RGKA | 14(6.5) | 0.31 (0.19) |
| 1/4" | R07-200-RGKA | 15(7) | 0.31 (0.19) |
| 1/4" | R46-200-RNLA (left to right flow) | 13(6) | 0.2 (0.09) |
| 1/4" | R46-202-RNLA (right to right flow) | 13(6) | 0.2 (0.09) |
* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C) † Typical flow with 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure and 15 psig (1 bar) droop from set.
After-sales clause:
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some
unexpected problems
happen, we hope to solve the problems with buyer through friendly
in the
following ways:
1, If it is quality problem, buyer can submit argue within 15days
after
receiving the goods,
buyer must provide photos or video and other evidence to seller for
identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one
year
(not included those
damages coursed by shipping or Man-made damaged ).
A 15% restocking fee is assessed for any products returned in
"used" condition. And then we will send a new
product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD)
has quality problems, we
will resend a new product in buyer next order; if buyer don't plan
to make a new order in
the near term, buyer can pay the resend shipping cost and ask to
resend a new product. If
there is an issue with the products, please contact us– we will
solve it as soon as we get.
If you have any other question, welcome contact us.
