|
[China]
Trade Verify
Address: F8 Xinke Road, Choujiang Street, Yiwu City, Jinhua City, Zhejiang Province
Contact name:NENE
YW DKE TRADING COMPANY |
|
Verified Suppliers
|
|
|
SMC KQG2H06-02s
SS316 0-1mpa Automation Industry
Product Description:
Male Connector Push to Connect Fittings with Thread Sealant, 316 Stainless Steel (KQG2H06-02S)
SMC One-Touch fitting.
Features
· Compact with reduced weight.
· Non-grease.
· Can be used with steam.
· Metal part: SUS316, Seal part: special FKM.
· Operating fluid temperature: -5 to +150°C
· Conforms to the Food Sanitation Act of Japan. (Part materials
conform to the tool and packaging container standards test.)
Applications
· Used for piping in one direction from a female thread.
Applicable Tubing:
| Applicable Tubing | Applicable Tubing | FEP, PFA, Nylon, Soft nylon Note 1), Polyurethane, Polyolefin |
| Tubing 0.D. | Ø3.2, Ø4, Ø6, Ø8, Ø10, Ø12, Ø16 | |
| Specifications | Fluid Note 3) | Air, Water, Steam Note 2) |
| Operating pressure range | -100 kPa to 1 MPa Note 4) | |
| Proof pressure | 3.0 MPa | |
| Ambient and fluid temperature Note 5) | - 5 to 150°C (No freezing) Note 4) | |
| Lubricant | Grease-free specification | |
| Seal on the threads | With sealant | |
| Temperature Condition of Mounting the Inner Sleeve | Tubing | Temperature |
| FEP tubing/TH Series | 80°C or more | |
| Super PFA tubing/TL Series | 120°C or more | |
Note 1) For soft nylon tubing, water cannot be used.
Note 2) Consult with SMC regarding applicable tube separately.
Note 3) Avoid using in a vacuum holding application such as a leak tester, since there is leakage.
Note 4) Check the operating pressure range and operating temperature range of the tubing.
Note 5) It is recommended that you use the inner sleeve in the following conditions (Except Ø3.2):
●When using at a high temperature.
●When using at a high temperature.
Male Connector: KQG2H | |||||||||
| Applicable tubing O.D (mm) | Connection thread R, M | Model | H (Width across flat) | Note 1) ØD | L | A* | M | Note 2) Efective area (mm²) | Weight |
| ø3.2 | M5 x 0.8 | KQG2H23-M5 | 8 | 8 | 16.5 | 13.5 | 12 | 3 | 3.3 |
| 1/8 | KQG2H23-01S | 10 | 15.4 | 12.3 | 3.4 | 5.7 | |||
| 1/4 | KQG2H23-02S | 14 | 21 | 16.3 | 16.9 | ||||
| ø4 | M5 x 0.8 | KQG2H04-M5 | 10 | 8.7 | 17.1 | 14.1 | 12.6 | 4 | 5 |
| 1/8 | KQG2H04-01S | 15.3 | 12.2 | 5.6 | 4.7 | ||||
| 1/4 | KQG2H04-02S | 14 | 20.9 | 16.2 | 15.8 | ||||
| ø6 | M5 x 0.8 | KQG2H06-M5 | 12 | 11.1 | 19.1 | 16.1 | 13.6 | 4 | 7.7 |
| 1/8 | KQG2H06-01S | 18.1 | 15 | 13.1 | 7 | ||||
| 1/4 | KQG2H06-02S | 14 | 20.8 | 16.1 | 14.5 | ||||
| 3/8 | KQG2H06-03S | 17 | 23 | 17.9 | 27.3 | ||||
| ø8 | 1/8 | KQG2H08-01S | 14 | 13.4 | 24.5 | 21.4 | 16.1 | 26.1 | 12.8 |
| 1/4 | KQG2H08-02S | 22.3 | 17.6 | 12.9 | |||||
| 3/8 | KQG2H08-03S | 17 | 23.7 | 18.6 | 24.7 | ||||
| ø10 | 1/8 | KQG2H10-01S | 17 | 16.4 | 25.5 | 22.4 | 17 | 26.1 | 18.9 |
| 1/4 | KQG2H10-02S | 27.9 | 23.2 | 41.5 | 21.6 | ||||
| 3/8 | KQG2H10-03S | 23 | 17.9 | 20.6 | |||||
| 1/2 | KQG2H10-04S | 22 | 28.6 | 22.2 | 51.1 | ||||
| ø12 | 1/4 | KQG2H12-02S | 19 | 18.5 | 30.5 | 25.8 | 18.6 | 58.3 | 27.4 |
| 3/8 | KQG2H12-03S | 24.7 | 19.6 | 20.5 | |||||
| 1/2 | KQG2H12-04S | 22 | 28.7 | 22.3 | 44.6 | ||||
| ø16 | 3/8 | KQG2H16-03S | 24.6 | 33.6 | 28.5 | 20.8 | 81 | 46 | |
| 1/2 | KQG2H16-04S | 24 | 29.5 | 23.1 | 113 | 37.4 | |||
Q: Where is your factory ? Can we visit your factory?
A:Our factory is located in Ningbo City, Zhejiang Province, China, 17kms away from
Ningbo Airport. We sincerely welcome customers to visit our company and factory.
Q: Could you add our logo on your products?
A: Yes, if your quantity more than 50pcs. we could add your logo on the products.
Q: What is your payment term and payment way?
A: Payment<=2000USD, 100% in advance. Payment>=2000USD, 30% T/T in
advance ,balance before shipment. Payment ways are : T/T, Western Union, Paypal
Alipay.
