BS476-6 Fire propagation Tests on Building materials and structures
Model: DX8298
Meet the standards:
BS476-6
GB / T 17658-1999: Fire Test of Fire Retardant Wood "Fire Test Method"
Scope of application:
Determination of the fire test performance of products used as
internal linings in buildings.
BS 476-6: Fire performance of wall and ceiling products is assessed
by flame propagation index size.A thermocouple was used to continuously record the difference
between the temperature in the chimney and the room temperature,
and the results (the curve of temperature difference and time) were
compared with the calibration curve, which was measured in the same
way with a specified density of asbestos-cement slabs.
BS 476-6 scope of application:
1. Indoor wall materials; 2. Thermal insulation materials; 3.
Ceiling materials
Descriptors:
Construction systems parts, Fire safety in buildings, Comparative
tests, Specimen preparation, Ceilings, Test equipment, Ceiling
linings, Structural fire protection, Test specimens, Fire-test
classifications, Testing conditions, Walls, Mathematical
calculations, Fire tests, Construction materials, Wall linings,
Calibration, Fire propagation.
Features:
1. Stainless steel cabinet support frame;
2. Calcium Silicate Board Burner;
3. All three samples are wrapped in stainless steel;
4, 2 sets of 1000 W quartz radiation device, to provide thermal
radiation for the sample;
5. T-type burner provides flame combustion for the sample;
6. The thermocouple continuously records the temperature and room
temperature difference in the chimney;
7. Automatically control the output power according to the time
test;
8. The computer automatically processes the data and prints the
test report.
Technical parameters:
| Ambient temperature | operation 10 ℃ to 35 ℃ |
| Natural gas supply | The gas supply standard specified in the standard is the standard
test gas G112, as specified by BS 4947 |
| Gas flow rate | The gas flow rate of the burner can be adjusted from 0 to 5 n / min |
| Voltage | 230V, 10A |
| Weight | 120kg |
| Pressure | 1 kpa |
Our products:
1. Fire Testing Equipment
2. Building Material Fire Tester
3. Wire and Cable Fire Tester
4. Environmental Test Chamber
5. Textile Testing Equipment
6. Plastic Testing Equipment
7. Tensile Testing Machine
