Results forfinger diameter 12mm test probe bfrom 17199 Products.
|
|
test probe 11, accessibility test probe,iec testing Model TP11: test probe 11, accessibility test probe,iec testing rigid test probe is used to assess protection of persons against ...
china
|
|
|
|
|
IEC60529 IP Code Probes Test Probe A and Test Probe 2 / Test Spheres Φ50mm and Φ12.5mm 1. Introduction: IP code probe is a test probe to verify the degrees of protection specified ...
|
|
|
|
IEC60529 IP1X Test Probe A Article NO.: BND-A Specification: IP1X Probe A /Test Probe A 1, According to : IEC61032:1997 /IEC60529:2001 and UL 2, IP1X Probe A (Test Probe A) is necessary appliance for domestic and similar ...
|
|
|
|
|
IEC 61032 Figure 8 Test Probe 12 Product Overview: This test probe conforms to the standard requirements of IEC 61032 figure 8 test probe 12, etc. This pin is intended to be used ...
|
|
|
|
|
Product Details Product information: This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. It conforms ...
china
|
|
|
|
|
Standard probe for eddy conductivity meter of TMD-105 Probes B type machine with diameter 14 mm working frequency of 60 KHz and diameter 8mm working frequency of 500 KHz of a probe...
|
|
|
|
|
material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to ...
|
|
|
|
|
IEC 60335-1 Home Appliances Testing Equipment Test Probe 13 of IEC 61032 Standard of Electrical Appliance Testing Equipment: IEC 60335-1: 2020 Household and similar electrical ...
|
|
|
|
|
Short test pin probe,test probe iec 61032 The Test Pin Probe is used to test for accessibility of small objects and meets IEC, CSA and UL requirements. The probe is made of ...
china
|
|
|
|
|
IEC61032 Test Probe D for IP4X / Test Wire with Nylon Handle 1N Force Applied 1. Introduction of Test Probe D: Test probe D (Test wire: Φ1.0 wire-length 100) Designed according to ...
|
|
|
|
|
IEC60529 IP1X Test Probe A with 50N thrust Article NO.: BND-A Specification: IP1X Probe A /Test Probe A 1, According to : IEC61032:1997 /IEC60529:2001 and UL 2, IP1X Probe A (Test ...
|
|
|
|
|
IEC 60950-1 Clause 4.2.5 Enclosures Against Ingress Test Probe 1 Figure 5 Ф50mm Product information: This impact steel ball confirms to IEC 60950-1: 2013 Clause 4.2.5, IEC 60065...
|
|
|
|
|
Product Details Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2,IEC60529 of IP2. It is intended to verify the degree of protection of enclosures ...
china
|
|
|
|
|
IEC 60335-1 Home Appliances Testing Equipment Test Probe 41 of IEC 61032 Standard of Electrical Appliance Testing Equipment: IEC 60335-1: 2020 Household and similar electrical ...
|
|
|
|
|
test probe 11 with 50N force,test probe with force Model TP11F: test probe 11 with 50N force,test probe with force rigid test probe is used to assess protection of persons against ...
china
|
|
|
|
|
IEC60529 IEC61032 Test Probe A for IP1X / Accessiblity Test Probe 50mm Steel Sphere 1. Introduction: Test probe A ( Φ50 sphere with handle) is designed according to IEC61032 fig.1, ...
|
|
|
|
|
IEC 61851-1 Stainless Steel Test Rod Probe D Test Probe With Alligator Clip Product overview: This rod probe is intended to verify the protection of persons against access to ...
|
|
|
|
|
IEC60335-2-24 φ75mm Sphere Test Probe Standards & Clauses: The φ75mm test rod meets the standard requirements of IEC 60335-2-24 clause 21.102. Application It is used for verifying ...
|
|
|
|
|
IEC61032 Figure 3 Protection Verify Test Probe C For Hazardous Parts Test Product information: This probe conforms to standard requirements of IEC61032 test probe C figure 3, and ...
|
|
|
|
|
IEC61032 Figure 4 Protection Verify Test Probe D For Hazardous Parts Test Product information: This probe conforms to standard requirements of IEC61032 test probe D figure 4, and ...
|
|
|
You may also be interested in :
