Active Member
|
[China]
Address: No.808, Haitong Road, Wenzhou Economical and Technological Development zone, Zhejiang, China
Contact name:Bryan
Wenzhou jhenten machinery co.,ltd |
|
|
Active Carbon / Sand Industrial Filter Housing For Water System
Deep Filtration Equipment Description
Mechanical Water Carbon / Sand Industrial Filter Housing For
Revese Osmosis ss316 / ss304 through the sand bed
or other filter media to finish filter. The filter bed is composed
of many particles of microporous and enormous specific surface with
strong physical adsorption capacity such as activated carbon,sand.
Water flow through the filter bed,organic pollutants in water was
adsorbed by activated carbon effectively. The available
method of backwashing restore its adsorption capacity. The
reasonable structure, easy to use, applicable to a variety of
higher quality requirement areas.
Deep Filtration Equipment Specifications
1)ss304ss316L
2)Medium Material:PP
3)Flange clamp / Thread open
4)OEM welcome
5)Can custom
Deep Filtration Equipment Working process
Raw water passes inside water distributor into filter media layer (quartz sand), which let impurities stay at sand layer. Clean water flow out stably from water collector. When the pressure drop reaches the given value, the cleaning cycle is started. The rinse control start working at pressure drop value at 0.05-0.15MPa, return to 0.02-0.04MPa after back flushing.
Quartz sand inside tank mixed with coarse and fine sands. They are
allocated above water distributor averagely. Even in back flushing,
water consumption is little.
Tank inside has rubber line and plastic line for option. It is for
anti-corrosion, which ensure a tank can be used 10-20years.
The completed filter control system has finished already in
factory.
Attentions in using
1. When filter first into use, users should clean sand bed firstly, after that to start filtration.
2. Turn all operating valves slowly, to avoid water impact.
3. Keep sharp or hard things away from filter.
4. Keep away from fire and high temperature.
5. Make sure sand is clean when not using.
Deep Filtration Equipment Advantage
1.Easy to operate
2.Long life span
3.Advanced technology
4.Beautiful appearance
Deep Filtration Equipment Typical application
water treatment system
Food&Beverage
Biotechnology
Chemical and painting filtration
Protection for RO system
Swimming pool, hotel spa, water entertainment, aquarium, fish
farm
Irrigation in agriculture
Drinking water pre-treatment
Industrial recycled water, central air-condition system
Deep Filtration Equipment Technical parameters:
1.Design pressure: 0.6 Mpa
2.Design temperature: 110 degree celsius
3.Sealing material: butyl rubber, silicone, fluorine rubber
, standard configuration is silica gel seal
5.Interface form: Flange
6.Applicable filter: flat crush type PP
great filter
7.Surface treatment: mirror polishing, electrolytic polishing,sandblast external surface
8.Filtration precision:high
9.Material: SUS304, SUS316, SUS316L
Others Fittings
Main parameters
| Item | Φ(mm) | H(mm) | H(mm) | H(mm) | Capacity(t/h) | Design pressure(Mpa) | Test pressure(Mpa) |
| ZTMF600 | 600 | 2520 | 1500 | 400 | 1.4-2.8 | 0.6 | 0.75 |
| ZTMF800 | 800 | 2640 | 1500 | 400 | 2.5-5.0 | 0.6 | 0.75 |
| ZTMF1000 | 1000 | 2690 | 1500 | 400 | 4.0-8.0 | 0.6 | 0.75 |
| ZTMF1200 | 1200 | 2790 | 1500 | 400 | 5.5-11 | 0.6 | 0.75 |
| ZTMF1600 | 1600 | 3505 | 2000 | 400 | 10-20 | 0.6 | 0.75 |
| ZTMF1800 | 1800 | 3585 | 2000 | 400 | 13-25 | 0.6 | 0.75 |
| ZTMF2000 | 2000 | 3685 | 2000 | 400 | 16-30 | 0.6 | 0.75 |
| ZTMF2200 | 2500 | 3785 | 2000 | 400 | 25-49 | 0.6 | 0.75 |
| ZTMF2400 | 3000 | 3847 | 2000 | 400 | 35-70 | 0.6 | 0.75 |
Order Information
| Item | ZT=ZTMF | |
| Cartridge adaptor | Flange | |
| Union | ||
| Qty of cartridge | R:600-3000 | |
| Cartridge length | 20=20inch | |
| 30=30inch | ||
| 40=40inch | ||
| Connection standard | BF=BSPF | BM=BSPM |
| D=DIN | A=ANSI | |
| TC=CLAMP | J=JIS | |
| NM=NPTM | NF=NPTF | |
| PM=PTM | PF=PTF | |
| Inlet/Outlet dimension | 10=1" | 15=1.5" |
| 20=2" | 25=2.5" | |
| 30=3" | 40=4" | |
| Construction material | 4=SS304 | 6=SS316 |
| Gasket material | E=EPDM | P=PTEF |
| V=VITON | S=SILIONE | |
| Surface finish | A=Electrical polish | B=Mirror Polish |
| C=Sand blasted | D=Matt polish | |
| E=Acid washing | F=2B | |
