Active Member
|
[China]
Address: No.808, Haitong Road, Wenzhou Economical and Technological Development zone, Zhejiang, China
Contact name:Bryan
Wenzhou jhenten machinery co.,ltd |
|
|
Top Entry Bag Filter Housing for some coarse filtration and pre filtering process
The side entry into, again from the top into the filter bag design, automatic pressure, does not produce turbulence, reducing the loss of pressure, effective protection of the bag
The top cover is fully pressed and sealed, and the sealing effect is better.
Stabilizer blade, the installation size can be adjusted according to the requirements of the scene
| Surface Finish | |||
| Finish Type | Mechanical polishing, Electroplate polishing, Sand blasting, pickling | ||
| polishing precision | Inside wall 0.6μm, Outside wall0.8μm | ||
| Basket 0.6μm | |||
| Operating Conditions | |
| Max Operating pressure | 1.0MPa |
| Max Operating Temp. | 110℃ |
| Material | |
| Shell | 304, 316L, SAF2507, Carbon |
| Eyebolt | 304 |
| Stabilizer blade | 304 |
| O-ring | EPDM, PTFE, Viton, Silicone |
| Connection | |
| Shell connection | Flange |
| In-outlet | Flange, Quick-open, Screw thread |
| Pressure gauge (optional) | M14×1.5 Internal Screw thread |
| Vent valve (optional) | 1/4” Internal Screw thread |
| Dimension Parameters | Cover | |||
| 1# | 2# | |||
| Total height | 790 | 1110 | ||
| The distance from inlet to center | 275 | |||
| Diameter | Φ204 | Φ204 | ||
| The height from inlet to ground | 620 | 940 | ||
| The height from outlet to ground | 200 | |||
| In-outlet dimension | 1.5” or 2” | |||
| Stabilizer blade | 550 | 700 | ||
| Max flow, m3/h | 6 | 12 | ||
| The above-mentioned data is the standard, it can customize according to customer's requirements. | ||||
| Selection Table | ||||||||||||||||
| ［Qty. of Bag Filter］ | ［Model of Bag Filter］ | ［Shell Material］ | ［In-outlet connection］ | ［O-ring］ | ||||||||||||
| ZTDD | 1P | 2S | 4 | F | E | |||||||||||
| 1P=1pc | 1S=1# Bag:Φ180 x 430 | 4= 304 | F= Flange | E=EPDM | ||||||||||||
| 2S=2# Bag:Φ180x 810 | 6= 316L | K= Quick-open | P=PTFE | |||||||||||||
| 3S=3# Bag:Φ105 x 230 | L= Screw thread | V=Viton | ||||||||||||||
| 4S=4# Bag:Φ105x 380 | S=Silicone | |||||||||||||||
