60Pixels/M P16.67mm 18w 12V Ws2815 Strip RGBW

60Pixels/M P16.67mm 18w 12V Ws2815 Strip RGBW

12V WS2812B LED Strip:
WS2815 LED strip is upgraded version of 5V WS2812B LED strip. For 5M LED strip, even if all the LEDs are turned on full white, 12V version has no voltage drop. You don't need to inject power as frequently as 5V version.
Individually addressable:
Each pixel can have its own color and brightness. You can control it individually and set them to any color or animation you want. 256 brightness display and 24-bit color display.
Dual-Signal Wires:
WS2815 LED strip is Similar like the version of 5V WS2813 LED strip, Designed with one data wire and one backup data wire. Signal break-point continuous transmission. If one LED is damaged, the following LEDs can still work.
Easy Installation:
Self-adhesive tape on back FOR IP30/IP65, it can be fixed on any dry and flat surface without any screws and clips. Each LED can be cut off at cutting line.
There are 4-pin JST SM connectors and separated power/ground wires on both ends, which make it easy to hook up each other and wire up for power.

Addressable strips is not only DC5V , DC12V is available 

1. Smart control IC WS2815 inserted in 5050 RGB diode , supporting numerous color-change effects and any animation programming .same working as WS2811 /WS2812B / SK6812 when do program in software .

2. 0.3w per diode in high brightness

3. 30LEDs/M 60LEDs/m , DC12V operating , 5meters in reel , 4Pin JST SM connector on both end and separated Power / Ground Wires .

4. Flexible PCB material .Each LED/Pixel can be cut ,there is cut lines every 16.67mm for 60leds/m ,every33.33 for 30leds/m

5. White PCB and black PCB optional

6.It is only Date Pin for signal transfer , no Clock Pin .

7. 10mm width PCB , 0.25mm (3ounce)thickness 8. with 3M tape back side for non-weatherproof version .

9: dual signal (one pixel is broken ,no affect next one work)

10: Current adjustable

Wire Define

• There is 4 Pin JST SM female/male connector on both end for signal input/output ;
• Red : +12V ;
• Green : Date ;
• Blue: Date;
• Balck: Ground
• Blue and black are used together

Cording Diagram