Results forfigure 6 ingress protection test equipmentfrom 73 Products.
|
IEC61032 Figure 6 Sphere Test Probe 1 Product information: This test sphere probe confirms to IEC61032 figure 5 test probe 1,IEC60335,IEC60950, IEC60598,UL507 standards. It is ...
|
|
|
|
IEC 60592 IPX1 to IPX8 Waterproof Ingress Protection Test Equipment Standard: IEC60529 degree of protection provided by enclosures (IP Code), clause 14.2.1, 14.2.2, 14.2.3, 14.2.4, ...
|
|
|
|
Ingress Protection Test Equipment IEC 60132 60335 Standard Test Probe Pin Thorn Kit Product information: The IEC 60132/60335 standard Test Probe Pin Thorn Kit are the necessary ...
|
|
|
|
IEC60529 IP2X Ingress Protection Test Equipment Test Finger Probe B Standard: IEC 61032 figure 2, IEC60950 figure 2A, IEC60884, IEC60335, UL507, and UL1278 figure 8.4. Standard ...
|
|
|
|
IEC61032 figure 6 probe 2 IEC60529 of IP2X Ingress Protection Test Equipment SФ12.5 Standard description(IEC 61032 Clause 5 ): List of test probes The comparative list of test ...
|
|
|
|
IEC60529 IP2X Ingress Protection Test Equipment Test Probe 2 With Force of 30N Standard:IEC61032 figure 6 probe 2,IEC60529 of IP2. Application:It is intended to verify the degree ...
|
|
|
|
IEC60529 IP4X Ingress Protection Test Equipment Test Rod Probe D 1 mm diameter Standard:IEC61032 figure 4 and IEC60529 for IP4 and IEC60065. Standard description: 13.2 Test ...
|
|
|
|
IEC60529 IP3X Ingress Protection Test Equipment Test Rod Probe C diameter2.5mm Standard:Confirm to IEC 60529 IP3X; EN 60529 IP3X; IEC 61032-1 Figure 3; IEC 60065 and so on. ...
|
|
|
|
Test Finger Probe B HT-I02 Description: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
IEC60529 Figure 5 Handheld Brass Spray Nozzle Tester For IPX3 IPX4 121 Holes Product Introduction The HT IPX3/4 Spray Nozzle is a hand-held test device to verify protection against ...
|
|
|
|
Test Wire Probe D HT-I04 Description: This wire probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection ...
|
|
|
|
Test Sphere Probe HT-I01 Description: This probe is intended to verify protection the back of hand of persons against access to hazardous parts. It is also the necessary probe used ...
|
|
|
|
12.5 mm Test Sphere Probe 2 With Handle , IEC61032 Figure 6 Probe 2 Test Probe Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2,IEC60529 of IP2. It ...
|
|
|
|
IEC60529 Figure 5 IPX3-4 Spray Nozzle IPX-5-6 Strong Water Spray Test Equipment Product information: The spray test system is designed and manufactured according to the standard ...
|
|
|
|
60529 Complete IP Testing Equipment from IPX1 To IPX8 Open Type Standard of IP Testing Equipment: IEC60529 degree of protection provided by enclosures (IP Code), clause 14.2.1, 14...
|
|
|
|
Test Rod Probe D Test Finger Probe IEC61032 Figure 4 Safety Testing Apparatus Product information: This probe conforms to the standard requirement of IEC61032 figure 4 test probe D ...
|
|
|
|
Test Finger Probe B Product information: This is a precision test finger made in accordance with many standards like IEC 61032 figure 2, IEC60950 figure 2A,IEC60884,IEC60335,UL507...
|
|
|
|
IEC61032 Figure 3 Test Finger Probe Test Rod Probe C 2.5mm Product information: This probe conforms to standard requirements of IEC61032 test probe C and IEC60529 for IP3 and ...
|
|
|
|
IEC60529 IPX5X IPX6X Sand And Dust 1000L PLC Control Test Chamber Figure 2 Product Introduction The sand and dust test chamber is designed and manufactured according to IEC60529...
|
|
|
|
Test Rod Probe C HT-I03 Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
You may also be interested in :