Home Companies Foc Communication CO.,LTD

Singlemode LSZH Jacket Fiber Optic Patch Cord Simplex / Duplex FC / UPC

Active Member

Contact Us

[China]

Address: 4F, Block 21, Wangtang Industrial Park, Xingao Road, Xinwei, Xili, Nanshan, Shenzhen, China

Contact name:Lily

Foc Communication CO.,LTD

Singlemode LSZH Jacket Fiber Optic Patch Cord Simplex / Duplex FC / UPC

Country/Region	china
City & Province	shenzhen guangdong
Categories	Radio & TV Broadcasting Equipment

Product Details

Singlemode LSZH Jacket Fiber Optic Patch Cord Simplex / Duplex FC / UPC

FC optical fiber cords are widely used in fiber optic systems; especially FC single mode products are very popular. FC standard fiber optic connectors are used for telecommunications, CATV, LAN, MAN, WAN, Test & Measurement, Industry, Medical and Sensors. They are well known for general, average applications. We supply single mode and multimode version FC fiber jumper cables and FC fiber optic components.

The single-mode optical fiber with low water peak used in the patch cords is compliant with ITU-T G.652.D standard. It provides full compatibility and ability to perform quality splices with existing fiber-optic networks. The average attenuation of the fiber is about 0.4 dB/km for 1310 nm, and 0.25 dB/km for 1550 nm. The optical fiber is reinforced by aramid fibers (Kevlar) and covered with PVC sheath.

The optical fibers compliant with ITU-T G.652.D are now among the best standard single-mode fibers on the market. Before introduction of the G.652.D recommendations, optical systems could use one of the three transmission windows with lower attenuation (I: 850 nm, II: 1310 nm, III: 1550 nm). Systems based on optical fibers with low water peak can work in the whole band from 1280 nm to 1650 nm.

   Features
   Meets Telcordia GR-326 Core and ROHS requirements.
   The connector could be SC,FC,LC,ST,MU, MTRJ ,E2000 etc.
   The cable could be G652D,G655,G657,OM1,OM2,OM3 etc.
   The cable size could be 1,6*3.3, 2.0*4.1,2.8*5.7
   Application: Fiber CATV, Fiber Cabling system, LAN,FTTH
   Clean and Scratch-Free End Face
   Proportional geometric test is applied to the normal production.
   100% interferometer check is available under special requirement.

Optical Specification

Connector	SC,FC,LC,ST,MU,E2000,MTRJ			MPO/MTP
Polishing	SM/UPC	MM/PC	SM/APC	SM/PC	MM/PC
Insertion Loss(max)	≤0.30dB	≤0.30dB	≤0.30dB	≤0.75dB	≤0.5dB
Return Loss(min)	≥50 dB	≥35 dB	≥60 dB	≥40dB	≥20dB
Tensile Strength	<10kg
Durability	<0.20 dB typical change, 500 matings
Repeatability	≤0.1dB
Storage /Operating Temperature (°C)	-40~+85

Geometric Specification

		PC End-face		APC End-face
Radius of Curvature	SC/FC/ST	10~25 mm		5~12 mm
	LC/MU	7~25 mm		5~15 mm
Apex Offset		≤50 um
Fiber Spherical Height		+/- 50 nm
Angular Offset		------	8°± 0.2°