Preterminated Fiber Optic Patch Cord 10M Multimode Simplex Sc To Sc Patch Cord

Preterminated Fiber Cable 10M Multimode Simplex SC to SC Patch Cords

1. Preterminated Fiber Cable Basic Introduction:

Pre-terminated Fiber Optical pigtail is to connect the optical node to the backbone fiber in CATV system. Its design fits Aerial, Base station, and Vault applications.

The pre-terminated cable production line includes a wide variety of cables, SM/MM optical fibers, and connectors, even the ruggedized ones, pulling eyes that protect connectors during the pull and feedthrough to ensure position and seal the cable in the wall or in the distribution box.

These assemblies are provided in either indoor or outdoor versions. Pre-terminated fiber optic cable assemblies ensure high quality and long-term reliability, with 1core, 4 cores, 6 cores, 12cores, etc. SC, LC, FC, ST Connectors are available. 

2. Preterminated Fiber Cable Benefit & Features:

• Fiber Construction
  Our standard patch cables are available in several different lengths and connector types. These fibers have a 900 µm jacket surrounded by a layer of Aramid yarn for extra protection. A 2.5 mm PVC cable jacket provides additional environmental protection.
• Custom Singlemode Patch Cables
  Use Model Number F-PATCH-CUSTOM to configure a custom fiber-optic patch cord using these fibers. You can specify the fiber type, length, jacketing, and input and output connectors.
• Excellent Performance
  Our Standard Patch Cables exhibit low attenuation while utilizing step-index fibers and also have a uniform core refractive index and a matched-clad profile.
• Popular Versions Available Off-the-shelf
  We carry many standard fiber optic patch cables available off-the-shelf for operating wavelengths of near UV 300, visible 488/514, 633, infrared 780, 820, 980, 1060, or 1300/1550 nm. If there is not a standard patch cable available for your application
• Fiber Type -- OM1, OM3, OM4, OS1/OS2

3. Preterminated Fiber Cable Specification&Technology Parameters

4. Ordering Information 

5. Legacy ordering information

6. Preterminated Fiber Cable Applications:

Applications include communication rooms, FTTH (Fiber to The Home), LAN (Local Area Network), FOS (fiber optic sensor), Fiber Optic Communication System, Optical fiber connected and transmitted equipment, Defense combat readiness, etc.
CATV network
Optical fiber communication systems
Optical fiber data transmission
Building network access
Cabling system, ODF
FTTX networks

7.  Options Available

-- LC Custom fiber optic jumper options include.
-- LC/PC (Physical Contact) Polish
-- LC/UPC (Ultra Physical Contact) polish
-- LC/APC (Angled Physical Contact) polish

Jacket: Riser (OFNR), Plenum (OFNP), Low Smoke Zero Halogens (LSZH), PVC

Diameter: 0.9mm (900µm), 1.6mm, 1.8mm, 2.0mm, 3.0mm

Jacket Colors: Aqua, Orange, Green, Red, Blue, Gray, Black, Yellow
LC Multimode 62.5/125µm MMF Fiber (Corning Fiber Optic Cable)
LC Multimode 50/125µm MMF OM2 Fiber (Corning Fiber Optic Cable)
LC Multimode 50/125µm MMF OM3 10Gb Laser Optimized Fiber (Corning Fiber)
LC Simplex cables or LC Duplex Cables are also available in optional colors.
LC Standard boot, LC 45° angled boot, LC 90°angled boot, or short boot options.
Corning Fiber Optic Cable, or Fiber One Fiber.
Call us today to speak with one of our qualified salespeople to help answer any questions.