Wuhan Geehe Optical Communication Co.,ltd |
3.0mm PVC (OFNR) 10M Duplex Fiber Optic Patch Cord SC APC
1.Fiber Patch Cord Basic Introduction:
Duplex SC APC fiber optic patch cord is used to connect fiber optic
equipment to equipment or patch panel to equipment. It comprises of
a patch cable terminated with SC APC fiber optic connectors at both
ends.
Cost-effective solution that provides high bandwidth and
transmission rates over longer distances. The patented
injection molding process provides each connection greater
durability in resisting pulls, strains, and impacts from cabling
install.
2. Fiber Optic Patch Cord SC To SC
Commerical Standards
3.DuplexSC To SC Patch Cord Application:
4.Specification&Technology Parameters
Parameters | Value | ||||
Connector Type | LC/UPC,LC/UPC | ||||
Center Wavelength(nm) | 1310 or 1550 | ||||
Max.Insertion Loss(dB) | 0.3 | ||||
Min.Extinction Ratio(dB) | 23 | ||||
Min.Return Loss(UPC) (dB) | 50 | ||||
Min.Return Loss(APC) (dB) | 60 | ||||
Key Orientation | Slow Axis | ||||
Axis Alignment(deg) | ±3 | ||||
Operating Temperature(℃) | -20~+70 | ||||
Storage Temperature(℃) | -40~+85 | ||||
FIber Type | PM Panda Fiber |
* For Device with connector.IL is 0.3dB higher,RL is 5dB
lower,ER is 2dB lower.
* The default connector key is aligned to the slow axis.
5. Fiber patch cord SC Specification& Technology Parameter:
Parameter | Unit | Index | |||
End-Face Type | PC | UPC | APC | ||
IL | dB | SM: ≤0.2; MM ≤0.1 | |||
Repeatability | dB | ≤0.1 | |||
interchangeability | dB | ≤0.2 | |||
RL | SM | dB | ≥50 | ≥55 | ≥65 |
MM | dB | ≥36(Without APC connector) | |||
Mating Times | >1000 | ||||
Operating Temperature | ℃ | -40~ +80 |
* EX:OFC-D-LA-LA-09-1-1.0
6. Fiber Optic Connectors are available
7. Geehe Factory Service