Single-steel-wire Armored Fiber Optic Cable GYTA53 / 33 Stranded Loose Tube

Description:

GYTA53+33 consist of 250µm fiber positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. And a PSP is longitudinally applied over the inner sheath, the cable is covered with a PE outer sheath. After the single-steel armored, the cable is finally completed with an outer sheath.

Features:

--Good mechanical and temperature performance
--High strength loose tube that is hydrolysis resistant
--Special tube filling compound ensure a critical fiber protection
--Crush resistance and flexibility
--Steel wire used as the central strength member
--Loose tube filling compund
--100% cable core filling
--APL mosture barrier
--PSP enhancing mosture-proof
--Water-blocking material

 

--Submarine water and vertical shaft

 

 

Cable Parameters

Cable Type	Fiber Count	Cable Diameter (mm)	Cable Weiigh (kg/km)	Tensile Strength Long/Short Term N
GYTA53+33	2~36	19.2	580	4000/10000
GYTA53+33	38~60	20.4	650	4000/10000
GYTA53+33	60~72	21.2	670	4000/10000
GYTA53+33	74~96	23.0	780	4000/10000
GYTA53+33	98~120	24.2	840	4000/10000
GYTA53+33	122~140	26.0	950	4000/10000
GYTA53+333	2~36	25.2	1640	20000/40000
GYTA53+333	38~60	26.4	1740	20000/40000
GYTA53+333	60~72	27	1780	20000/40000