SHENZHEN FURONG FIBER OPTIC CABLE CO.,LTD |
|
GENERAL |
The cable is applicable for short span overhead outdoor with span distance up to 60 meters for last mile cable. The cable is also applicable for indoor and outdoor areas.
REFERENCE STANDARDS
The offered fiber optic cable complies to the ITU-T G.652.D, ITU-T G.657.A1, IEC 60794, TIA/ EIA standards.
CONSTRUCTIONS |
CABLE STRUCTURE
Bending Loss Insensitive Fibers |
– 2 Fibers (Blue & Orange) single mode ITU-T Rec. G.657.A1 bending loss insensitive optical fibers
Non-Metallic anti-buckling strength element |
– GRP/FRP Ø 0.4 mm x 2
– Protect the optical fibers from any excessive elongation and tensile loads that occur during installation and operation
Anti-Rodent material |
– Provides rodent bite protection
Low Smoke Zero Halogen Flame Retardant (LSZH FR) jacket |
– Black UV resistant Low Smoke Zero Halogen Flame Retardant (LSZH FR) sheath as outer protection
– The thermoplastic sheath does not promote the growth of fungus and be free of pits, splits and blisters
– Reduces the amount of toxic and corrosive fume emission
– Other sheathing are available upon request
PARAMETERS |
FIBER PARAMETERS OF SINGLE MODE OPTICAL FIBER
Reference Standard | ITU-T G.652.D | ITU-T G.657.A1 |
Type | Single Mode | Bending-Loss Insensitive Single Mode |
Wavelength (nm) | 1310 / 1550 | 1310 / 1550 |
Attenuation on Finished Cables (dB/km) | 0.35 / 0.20 | 0.35 / 0.20 |
Typical Attenuation (dB/km) | 0.35 / 0.19 | 0.35 / 0.19 |
Mode Field Diameter (µm) | 9.2 ± 0.4 / 10.4 ± 0.5 | 9.2 ± 0.4 / 10.4 ± 0.5 |