Home Companies Shenzhen CY COM Product Co., Ltd.

OM3 72 Fiber Mutimode SM MM MPO MTP Cables

Active Member

Contact Us

[China]

Address: 2nd F.,Block 1,Feihuangda Hi-Tech Park,Liyuhe Industrial Zone, Loucun,Guangming New Dist., Shenzhen, China

Contact name:Lena

Shenzhen CY COM Product Co., Ltd.

OM3 72 Fiber Mutimode SM MM MPO MTP Cables

Country/Region	china
City & Province	shenzhen guangdong

Product Details

OM3 72 Fiber Mutimode SM MM MPO MTP Cables

72Fiber 6 MPO to 6 MPO Truck Cable Singlemode Mutimode SM MM MTP Patch Cord

MTP/MPO cables arecomposed of MTP/MPO connectors and fiber optic cables, other connectors such asLC may also be found in some kinds of MTP/MPO cables. The fiber cables used aregenerally OM3 and OM4, which are laser optimized multi-mode optical fibers.

Features

Backbone installation
100% tested before delivery
MTP And MPO available
Use 12/24 Cores Fiber Connector
Trunk Cable Counts usually 12 / 24 / 36 / 48 / 72 /96 / 144-fibers
3.0/3.6 mm Round Cable or Customized
SM/OM1/OM2/OM3/OM4 or Customized
LSZH, OFNR, OFNP available

MPO connectors are available in a female version (without pins), or a maleversion (with pins) as shown in the following picture. The pins ensure theexact alignment of the fronts of the connectors, and also they ensure the endfaces of the fibers are not offset.

Noses and guidegrooves (key) on the top side are the two other clearly visible features, whichensures the adapter hold the connector with the correct ends aligned with eachother. Based on the placement of the key, two types of MPO adapters areavailable. One is “key-up to key-down”. It means the key is up on one side anddown on the other. The two connectors are connected turned 180° in relation toeach other. The other one is “key-up to key-up”. It means both keys are up. Thetwo connectors are connected while in the same position in relation to eachother.

Connection Rule

Always use one male connector and one female connector plus one MPO adapter when creating a MPO connection (see the following picture).

Never connect a female to a female or a male to a male. It should be connected with a male and a female as stated above. With a female-to-female connection, the fiber cores of the two connectors will not be at the exact same height because the guide pins are missing. That will lead to losses in performance. A male-to-male connection has even more disastrous results. There the guide pins hit against guide pins so no contact is established. This can also damage the connectors.
Never dismantle a MPO connector. The pins are difficult to detach from a MPO connector and the fibers might break in the process. In addition, the warranty becomes null and void if you open the connector housing.

MTP/MPO Cables

MTP/MPO Cable has the advantages of shorter installation times, tested and guaranteed quality and greater reliability. It has several different kinds of types.

Trunk Cables

Trunk cables serve asa permanent link connecting the MTP/MPO modules to each other. They are available with 12, 24, 48 and 72 fibers. Their ends are terminated with 12-fiber or 24-fiber MTP/MPO connectors according to customer's choice. These trunk cables like 12 fibers MPO trunk cable could help to create a simple,cost- effective 40G networking by installing a structured cabling system. MTP/MPO trunk cable requires greater care in planning but has a number of advantages, such as higher quality, minimal skew, shorter installation time,better protection, smaller volume of cable and lower total costs.

Specifcation:

Model	SM	MM
Connector Fiber Count	8/12/24 core
Polish	PC/APC
Housing Color	standard(green) Elite(yellow) standard (green)	Standard(Beige) Elite(Auqa)
Insertion Loss Standard Type	less than 0.7dB	less than 0.5dB
Insertion loss Elite type	less than 0.35dB	less than 0.3dB
Return Loss(dB)	PC>50dB/APC>60dB	>30dB
Durability(500matings)	less than 0.2dB
Test Wavelength	1310/1550nm	850/1300nm