Active Member
|
[China]
Address: 3F, Huayang Bldg, Minwang Rd, Minzhi Sub-district, Longhua District, Shenzhen, Guangdong, China
Contact name:Tao
Fiberall Technology (Shenzhen) Co., Ltd |
|
|
Passive ONU Optical Network Unit With 3 FE 1 GE 1 CATV 1 SC Fiber Port And WIFI
Fiberall Provide Both OEM And ODM Service for OLT And ONU
We provide the below OEM and ODM service for our ONU: 1, Customized user name and password ; 2, MAC address; 3 , WiFi Name; 4, Customized Print on Product; 5, Customized label on both product and packing; 6, Customized packing. 7, Appointed chip; 8, Appointed PON module and so on. All OEM and ODM service must be based on a certain order qty, extra cost may be added and some product do not provide OEM or ODM service and some item only accept partial OEM. Please kindly check carefully with Fiberall sales if you need OEM or ODM service and provide all your detail requirement so that we can check the feasibility and cost.
Main Features Of FA-EONU8081D
8K MAC address
Full speed without blocking exchange
Support Full Range VLAN ID and QinQ VLAN,1:1VLAN,VLAN Trunk etc.
QoS based on interface,IEEE 802.1p,IPV4(ToS),Diff-Serv,IPV6,802.1Q VLAN ID,destination MAC or source MAC.
Support port monitor, port mirror ,port speed limit ,port SLA etc.
The Ethernet interfaces according to the specifications of the IEEE802.3.
128-bit AES encryption algorithm.
According to 802.1x remote management and user authentication
Support CTC2.1 standard ( China Telecom EPON Technical Requirement 2.1)
Complies with 2.4GHz IEEE802.11n v2.0 and backward compatible with IEEE 802.11b/g standards
Supports NAT/NAPT IP sharing
WAN Protocols: PPPoE/Static IP/PPTP/DHCP
High speed data rate - up to 300Mbps
Supports advanced 2T2R MIMO technology (multiple-input multiple-output) to enhance the throughput and coverage range significantly
Supports Virtual Server and DMZ
Supports Wi-Fi Protected Setup (WPS) with reset button
Supports 64/128-bit WEP encryption and WPA-PSK, WPA2-PSK security
Supports WMM function to meet the multimedia transmission requirement
Supports WDS mode
Supports Special Applications (Port Triggers)
Supports DDNS (DynDNS, TZO), and QoS
Supports MAC/IP filtering and URL blocking
Supports DHCP server and Anti-Dos firewall
CATV radio frequency feature is optional
Product Specifications
| Item | Parameter | specification |
| Optical interface specification | Transmission rate | Downlink:1.25 Gbps Uplink:1.25 Gbps |
| Optical specifications | Downstream Wavelength:1490nm+/-20nm Minimum receiver sensitivity:-27dBm Receive saturation power:-3dBm Upstream Wavelength:1310nm+/-50nm Minimum output optical power:0dBm | |
| Maximum users | Up to 32 users within 20km. | |
| PON connector | SC/PC | |
| Optical physical conditions | IEEE802.3-2005 1000 BASE-PX20+ | |
| Optical fiber | G.652 single-mode fiber | |
| Ethernet interface specification | Standard compliant | IEEE802.3 IEEE802.3u IEEE802.3x |
| Port number | 1 GE— ONU Port | |
| 3 LAN— Router LAN Port | ||
| Connector type | RJ-45 | |
| LAN | IEEE 802.3 10/100BASE-T, Automated negotiation Full duplex/Half duplex Support RJ-45 MDI/MDIX | |
| VLAN | IEEE802.1q | |
| Support distance | Up to 100 meters | |
| WLAN specification | WLAN | Compliant with IEEE802.11b/g/n |
| CATV | CATV | CATV radio frequency feature (optional) Output level 85dBuv (input-6dbm) AGC working range 10dB CNR ≥46dB@-6dBm (input) |
| EMC and safety | EMC | EN55022 B(CISPR 22B) |
| ESD defend and preserve | IEC 61000-4-2 GR-1089-CORE | |
| Laser eye safety | FDA 21CFR 1040.10 and 1040.11 EN(IEC) 60825-1 EN(IEC) 60825-2 | |
| Environment-protection standard | RoHS | |
| Environmental requirements | Running temperature | -10ºC~55ºC |
| Storage temperature | -30ºC~60ºC | |
| Operating humidity | 10%~90% ,on-condensing | |
| Storage humidity | 5%~95% ,Non-condensing | |
| Power | Power Supply | DC12V/1A |
| Power consumption | Max 10W | |
| Physical specifications | Size | L x W x H:245 mm x 150 mm x 37mm |
| Weight | <500g |
