Horizontal Optical Fibre Cable Joint Closure For Overhead Installation Max 192 Fibers

FA-FSC-HO3, Horizontal Fiber Splice Joint Closure For Overhead Installation Max 192 Fibers

Technical performances of fiber splice joint closure:

1, Fiber splice joint closure is composed of four parts: casing, inner members, sealing elements and protect components.

2, Materials of fiber splice closure should be physical and chemical stability, with good compatibility (compatible with cable sheath material and materials of outside equipment) features.

3, Fiber splicing enclosure should be with complete shape, no burrs, no bubbles, no cracks and voids, no warping, no impurities, all color are uniform.

4, Pump 100kPa + 5kPa pressure into the installed fiber splice enclosure, which is already finished all operation and sealed according to operation instruction, press it into clean water container at room temperature and observe 15min, there is no bubble emerges (or stable observation 24h there is no change on barometer ).

5, Pump 100kPa + 5kPa pressure to splice joint closure which is already finished sealing for three times (repeated) according to the provisions of operation procedure, soak it in clean water container at room temperature and observe 15min, there is no bubble emerges (or stable observation 24h there is no change on barometer ).

6, Mechanical properties of optical cable splice closure: do the below test after filling with 60kPa + 5kPa pressure: soak it in clean water container at room temperature and observe 15minutes, there is no bubble emerges (or stable observation 24h there is no change on barometer ) and there is no crack on shell and its components, no obvious damage and deformation.

Specifications Features FA-FSC-HO3

The horizontal fiber optic splice closure adopts the flashboard structure design;

Installed and sealed by rubber seals and screws which can be used repeatedly;

Applicable to overhead, pipeline, buried directly and so on;

With conjoined sealing parts can be elastically deformed and sealed reliably, and can be repeatedly installed and used;

Fiber tray has large storage space and easy for expansion;

Suitable for ribbon fiber; bundle fiber optic cable and FTTH drop cable;

Whole bolt and silica gel sealing structure is adopted;

The splice closure is with advantages of strong impact resistance, tight sealing, etc.;

Silicone seal is stable and reliable, to prevent leakage problems.

Supplementary Materials(to be provided by operator)

Special Tools (to be provided by operator)

Universal Tools(to be provided by operator)

Splicing And Testing Instruments (to be provided by operator)