Shenzhen Unifiber Technology Co.,Ltd |
Verified Suppliers
|
|
G652D Aerial All-dielectric self-supporting (ADSS) fibre optic cable single jacket 100~500m span HDPE outer sheath
ADSS cable is loose tube stranded. Fibers, 250μm , are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.
Features:
Self-supporting
Loose tube design
Sutable for Aerial self-support installation
Instead of Aramid yarn or glass yarn,there is no support or messenger wire required.
Stable performance and compatibility with all common fiber types
Track-resistant &jacket available
For 10KV and 35KV power lines can use polyethylene(PE), for 110KN
and 220KN power line, must by the resistance to corrosion(AT) outer
sheath.
Application
The actual status of overhead power lines is taken into full
consideration when ADSS cable is being designed. For overhead power
lines under 110kV, PE outer sheath is applied. FOR power lines
equal to or over 110kV, AT outer sheath is applied. The dedicate
design of aramid quantity and stranding process can satisfy the
demand on various spans.