Active Member
|
[China]
Address: Wuhan Optical Valley of Lenovo Industry Base, NO.19, High-tech 4 Road, East Lake New Technology Development Zone, Wuhan
Contact name:Cathy/Nina
Fuji Science & Technologies (Wuhan) Co., Ltd. |
|
|
FTTH 24 48 Cores Outdoor Aerial Install Fiber Optic Distribution Box Splice Closure
The distribution box can be used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
● Reliable gasket sealing Optic Splice Closure
● Easy installation with no special tool required Optic Splice
Closure
● Re-enterable with no re-entry kit needed Optic Splice Closure
● High compressive strength Optic Splice Closure
● Suitable for ribbon and non-ribbon fibers Optic Splice Closure
● Aerial Optic Splice Closure
● Cable duct Optic Splice Closure
● Direct burial Optic Splice Closure
● Wall-mounted Optic Splice Closure
ITEM | FDB-005 |
Dimensions(mm) | 335*179*85mm Optic Splice Closure |
Weight | 1.2kg Optic Splice Closure |
Cable input capacity | 3 Optic Splice Closure |
Cable output capacity | 3 Optic Splice Closure |
Max.capacity | 48 core Optic Splice Closure |
Opration Temperature | -40°C-+85°C Optic Splice Closure |
Tensile Strengh | ≥450Kg/c㎡ Optic Splice Closure |
Impact Strengh | 35Kg cm/cm (nomar temp.) Optic Splice Closure |
10Kg cm/cm(-30°C) Optic Splice Closure | |
Flexural Strengh | ≥450Kg/c㎡ Optic Splice Closure |
Specification | ||
Environmental Requirement | Working temperature | -40℃~+85℃ |
Relative humidity | ≤85%(+30℃) | |
Atmospheric pressure | 70KPa~106Kpa | |
Thunder-proof Technical Data | The grounding device is isolated with the cabinet, isolation
resistance is no less than 2 104 MΩ/500V (DC);IR≥2 104 MΩ/500V | |
The withstand voltage between grounding device and cabinet is no
less than 3000V (DC )/min, no puncture,no flashover; U≥3000V | ||
