Home Companies Shenzhen Huayixin Technology Co., Ltd.

MPO MTP Fiber Optic Patch Cord , QSFP+ To SFP+ Cable OS2 OM3 OM4

Active Member

Contact Us

[China]

Address: 507,2 Building,Aeronautical Science and Engineering Park,Minhuan Road,Longhua district,ShenZhen

Contact name:

Shenzhen Huayixin Technology Co., Ltd.

MPO MTP Fiber Optic Patch Cord , QSFP+ To SFP+ Cable OS2 OM3 OM4

Country/Region	china
City & Province	shenzhen

Product Details

optical fiber patch cords QSFP+ to SFP+ OS2 OM3 OM4 MPO MTP patch cord

①MPO/MTP Trunk Cable
②MPO/MTP Harnesses Cables
③MPO/MTP Fan out 0.9mm Patch Cords
④IP-Series MPO/MTP Assembly
⑤High Density Patch Cords
⑥MPO/MTP Loopback
⑦MT Patch Cords
⑧MPO/MTP Cassettes
⑨MPO/MTP Fiber Optic Patch Panel

QSFP+ to SFP+ OS2 OM3 OM4 MPO MTP fiber optic fanout cable
MTP Breakout cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching
in data centers which need space saving and reduce cable management troubles. With MTP or MPO connectors , it is optimized for
10/40/100G high-density data center applications. Please note: The US Conec MTP connectors are fully compliant with the MPO
standards, achieving higher performance levels when compared to generic MPO connectors.

APPLICATION
Data communication network
Optical System Access network
Storage area networking fiber channel
High density architectures

FEATURES
1. Insertion loss type available in Standard, Elite / Low Loss
2. Fiber count available in 6, 8, 12, and 24
3. MTP/MPO connector type available in Male and Female
4. Fiber type available in SM (G652D, G657A1, G657A2), MM (OM3, OM4)
5. Fanout length available in 0.5m, 1m, etc.
6. Multi-fiber connector type available in MTP, MPO with APC or PC polishing type
7. Single-fiber connector type available in LC, SC with APC or UPC polishing type
8. Factory terminated & tested with guaranteed quality
9. High density to dramatically save space

Performance Level			Standard		Elite
Connector	Mode	Endface	IL(max) (dB)	RL(min) (dB)	IL(max) (dB)	RL(min) (dB)
MPO/MTP	SM	12F/APC	≤0.70	≥60	≤0.35	≥60
		24F/APC	≤0.75	≥60	≤0.35	≥60
		48F/APC	≤0.75	≥60
	MM	12F/PC	≤0.50	≥20	≤0.35	≥20
		24F/PC	≤0.50	≥20	≤0.35	≥20
		48F/PC	≤0.50	≥20
LC/SC/FC/ST	SM		≤0.30	≥60	≤0.10	≥60
	SM	UPC	≤0.20	≥50	≤0.10	≥50
	MM	PC	≤0.20	≥30	≤0.10	≥30

Note:
1.Test wavelength:SM@1310/1550nm,MM@850/1300nm;
2.Standard conformance: GR-326,GR-1435.

Mechanical Properties
Item		Criteria	Conformance
△IL After 50 Matings	MPO/MTP	≤0.3dB	GR-1435
△IL After 500 Matings	LC/SC/FC/ST	≤0.2dB	IEC 61300-2-2
Min Bend Radius (Dynamic)		20*OD (Cable Diameter)
Min Bend Radius (Static )		15*OD (Cable Diameter)