The faster automated features of the 90S fusion splicer reduce
installation times. With this splicer, an operator can complete the
entire splicing process from splicing to heating without touching
the 90S and only moving the fiber.
The fiber retention clamps support the automated operations. When
the sheath clamps open automatically after splicing, the fiber
retention clamps gently hold the spliced fiber to keep it from
flying out. The retention clamps release when the fiber is lifted
by the operator.
Product details
Fibre Count | Single |
Cladding diameter | 80 to 150m |
Coating diameter | 100 to 1000m |
Applicable fibers | SM MM DS NZ-DS EDF |
Fiber cleaved length | 8-22mm (standard) |
Splicing mode | Auto & Manual |
Average splice loss | 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS) |
Return loss | ≥ 60dB |
Environment conditions | Environment conditions: -25~+50C (operation temperature), 0~95%RH
(hu |
Protection sleeve length | 20mm 40mm 60mm |
Product Keywords | optical fiber fusion splicer machine priceShineway Tech fiber
splicing machine |
01.
Core Alignment Technology The 90S fusion splicer has high precision
lenses which provide accurate core to core alignment regardless of
core-cladding concentricity error. Also, the lenses allow the
splicer to discriminate between fiber types.
02.Advanced Image Processing Technology The 90S possesses advanced
image processing technology which analyzes the profile of the fiber
image as a brightness pattern. The 90S finds the true core position
and achieves the consistent lower splice loss.
03.Fiber Discrimination Function The 90S fusion splicer
automatically identifies the optimum arc discharge parameters in
accordance with the fiber type.
02.
Carrying Case There are multiple ways to utilize the 90S carrying
case. The 90S is ready to use just by opening the case, but it is
also possible to use the 90S on top of the carrying case or only
with the work tray depending on the work environment.
Active Blade Management Technology
01.
Automatic Blade Rotation The 90S fusion splicer and CT50 fiber
cleaver are enabled with wireless data connectivity. This
capability allows automatic cleaver blade rotation when the splicer
judges the blade is worn. Also, the 90S fusion splicer can connect
to two CT50s simultaneously.
02.
Blade Life Management The 90S fusion splicer displays the remaining
blade life and informs the user when a blade height change,
position change, or new blade is required.