Active Member
|
[China]
Address: Room 103, Unit 4, Building 2, Guanggu 8# Industry Park, Gaoxin 6th Road, East-Lake New Technology Development Zone of Wuhan, Hubei Province
Contact name:Lucy Liu
Wuhan LS Photoelectric Technology Co., Ltd. |
|
|
Applicate material :
Metals and alloys (iron, copper, aluminum, magnesium, zinc and all other metals),plastics,rare metals and alloys (gold, silver,titanium), metal oxides (metal oxide may be), special surface
treatment(Phosphatize, aluminum anodizing, electroplating the surface), ABS material (electrical appliances shell, daily necessities), ink (translucent keys, print products), epoxy resin
(electronic components, packaging, insulation layer).etc.
| Laser Sourse | |
| IPG Series | Pulsed, High Energy Ytterbium Fiber Lasers |
| Mode of operation | Pulsed |
| Polarization | random |
| Q-switched operation | |
| Output power adjustment range | 10%-100% |
| Nominal average output power W | 10W / 20W / 30W / 50W |
| Central emission wavelength | 1060-1070 nm |
| Emission Bandwidth (FWHM) | <10 nm |
| Long-term average power instability | <5% |
| Pulse width, (FWHM) | 100 ns |
| Laser switching ON time | 180 μsec |
| Laser switching OFF time | 180 μsec |
| Pulse Repetition Rate* kHz | 20-80 kHz |
| Energy per pulse (PRR = 20 kHz) | 0.95 mJ |
| Typical beam quality, M2 | <1.8 |
| Output fiber delivery length | 3m |
| Operating voltage | 220V |
| Max. Power consumption | 600W |
What kind of materials can a GY laser cut / engrave?
| Acrylic | Cork | Leather | Paper | Styrene |
| Anodized Aluminum | Crystal coated metal | Marble | Plastic | Tile |
| Anodized metal | Fabric | Matte board | Polyester | Veneer |
| Bamboo | Fiberglass | Melamine | Polyester film | Vinyl |
| Carbide | Foam | Mylar | Pressboard | Wood |
| Cardboard | Glass | Nylon | Rubber | |
| Ceramics | Kevlar | Painted metals | Silicon | |
| Composites | Laminated plastic | Painted materials | Stone |
|
Features
1 Imported fiber laser system
2 Excellent optical mode, long operating life, up to 100,000HS
3 The highest electro-optical conversion efficiency, up to 80%, but gross power less than 600W
4 Small size, steady, without maintenance, easy to operate
5 High precision, suited for fine processing on all metal and some non-metal.
A semic conductor module
A set of high-speed vibrating mirrors
A set of marking control system
An industrial computer
A marking work table
A red laser pointer
A pedal switch
A set of marking software
A user manual
Quality Guarantee
The guarantee period of quality shall be 12 months counting from the date on which the commodity arrives at the port of destination.
Payment term T/T in advance
Production time 7-15 working days
Warranty: 1 year
