Active Member
|
[China]
Address: 1st Floor,Block D,No.7 Building, Changzui Optoelectronic Industrial Park, Gaoxin 6th Road, Economic Development Zone Jiangxia District, Wuhan, Hubei Province,China
Contact name:Mario Lu
Wuhan Keyi Optic & Electric Technology Co., Ltd |
|
|
50W Optical Fiber Laser Marking Machine With Ce Standard For Metal
Photos of machine
Laser marking machine can work with most metal marking applications, such as Gold, Silver, Stainless Steel, Brass, Aluminum, Steel, Iron etc, and can also mark on many non-metal materials, such as ABS, Nylon, PES, PVC, Makrolon.
1. Mechanical Parts: Bearings, Gears, Standard Parts, Motor, etc
2. Instrument: Panel Board, Nameplates, Precision equipment, etc.
3. Daily Necessities: Handicrafts, Zipper, Key Holder, Sanitary
Ware, etc.
4. Hardware Tools: Knives, Tools, Measuring Tools, Cutting Tools,
etc.
5. Automobile Parts: Pistons and Rings, Gears, Shafts, Bearings,
Clutch, Lights, etc.
6. Electronic Components: Resistors, Capacitors, Chips, Printed
Circuit Boards, Computer Keyboard, etc.
| Model | Configurations | Quantity | Warranty | |||
| Fiber laser marking machine | 20w/30w/50w/100w | 1 | 2 years | |||
| Sino Galvo scanning head | 1 | |||||
| F-lens | 1 | |||||
| JCZ card | 1 | |||||
| EZCAD marking software | 1 | |||||
| Taiwan meanwell driver | 1 | |||||
| EXtenal red light indicator | 1 | |||||
| Footswitch | 1 | |||||
| Laser goggles | 1 | |||||
| Product Name Product ID | FB serial laser marking machine KY-M-FB | |
| Marking Parameters | Marking Size | 110mm*110mm(Any other else) |
| Marking Speed | 0-7000mm/s | |
| Marking depth / Roman Type , Character Height 1mm | 0.01-1.5mm( Depending on material and laser power) | |
| Marking Content/ Character Types | Text/letters/numbers/symbols/graphics/design/logo, etc. Date/time/QR code / Barcode/ batch number/serial number, etc. real-time number coding | |
| Min. Spot Size | 0.02mm | |
| Marking Width | 0.01-0.2mm(Depending on the material) | |
| Repeatability | ±0.003mm | |
| Laser Characteristics | Laser Type / Wavelength | Fiber Laser/1064nm |
| Output power(General) | ≤20W 30W 50W 100W Optional | |
| Power Stability(8h) | ＜±1﹪ms | |
| Beam Quality | M2<1.2 | |
| Modulation Frequency | Depends on laser power (KHZ) | |
| Laser Safety Class | Class IV | |
| Other Info | System Protection Rating | IP54 |
| Cooling | Air Cooling | |
| Operating Environment Requirements | Temp.:8℃-40℃; Relative humidity≤95%RH； Air dust≤0.01g/m³；Atmospheric pressure ≤86—106Kpa | |
| Power Supply | 220V±5%,50Hz±5% Single-phase AC power supply | |
FAQ:
Q: How can i get price ?
A: Please contact sales Chris Lee for discussing about your detail requests then he will give you quotation.
His contact information is at the end of this page, feel free to have a check.
Q: What is your package ?
A: We have 3 layers package. For the outside, we adopt wood craft case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by thickening plastic bag for waterproof.
Q: How about payment ?
A: Deposit before production & balance before shipment.
Q: How to protect my order?
Trade Assurance is a free payment protection service for buyers.
The service is offered by participating suppliers, and is designed to protect your payment if your order is not shipped on time, or if the pre-shipment product quality (optional) does not match the terms agreed on your contract.
Your payment is protected up to 100% of an amount - agreed between you and the supplier - called the Trade Assurance Order Amount.
Q: How to instal machine while i receive it ?
A: Our Technicians will instal machine well before shipment.
Q: What about warranty?
A: We provide 2-year warranty for machine. At the same time, we provide technical support full life. Contact with us freely if you need any support while operating machine.
Q: May i require a marking test before ordering ?
A: Sure, you can contact with Chris and tell him your marking test request details then he can arrange it for you.
Package
