10 / 100 / 1000Mbps Ethernet POE Switch With SFP Slot 32 Gbps Bandwidth

Overview

This unmanaged 16 port 10/100/1000Mbpst PoE switch with 250W internal power, also with 2 gigabit SFP slots,provides an easier installation way for your PoE devices (IP cameras,VoIP,wireless AP,etc.).And it can detect your PoE devices according to PoE standard.So the users do not need to worry about the PoE switch will damage their PoE devices.The max transmission distance is 100 meters with Cat5 cables.Ideally,shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss.Plug & play design make the installation quite easy,users do not need any configuration,which make this PoE switch a very good choice for IP cameras,wireless AP,VoIP users.

Features

• 16 Port 10/100/1000Mbps PoE+ 2 Gigabit SFP slots
• Complies with the IEEE 802.3af/at standard( if 8 POE port work only, then complies with IEEE 802.3at standard)
• Support MAC address auto-learning and auto-aging
• Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
• 250W internal power
• Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
• 32 Gbps Switching Capacity
• Power pin: 12(+) 36(-)

Warranty: One Year

Technical Indexes