shenzhen jie teshin communications equipment co. ltd |
|
Description
The FBT optical splitter bundles two or more fibers together, and
then melts and stretches them on a taper, and monitors the change
of the split ratio in real time. After the split ratio reaches the
requirement, the melt stretch is completed, and one end of the
fiber is retained. (the rest is cut off) as the input, and the
other end is used as the multi-output.
fused fibers are very fragile, they are protected by a glass tube
made of epoxy and silica powder. Then a stainless steel tube covers
the inner glass tube and is sealed by silicon. FBT splitter with
ABS box is also widely used for different applications.
It features small size, high reliability, cheap cost and good
channel-to-channel uniformity, and is widely used in PON networks
to realize optical signal power splitting.
Rollball provides whole series of 1xN and 2xN splitter products
that are tailored for specific applications.
Rollball offers both tree and star type inline couplers/splitters.
They provide a reliable solution to split/combine signals. The
splitting ratio ranges from 1x2 to 1x4 ports for tree couplers, and
from 2x2 up to 4x4 for star couplers. Available in single, dual,
and tripple wavelength windows(1310/1490/1550nm).
Features:
Low insertion loss, low PDL
High credibility and stability
Industry standard and custom housing available
Various coupling ratio and connector available
Application:
CATV System
Fiber to the home (FTTH)
Optical communication system
System and signal monitoring
Ordering Information
SMMC-22-85-20-OM1-09-10-B1-FU
1 Ports | 2 Wavelength | 3 Coupling ratio | 4 Fiber Type | 5 Pigtail Dia. | 6 Pigtail Length | 7 Package | 8 Connector Type |
12=1x2 | 85=850nm | 01=01/99 | OM1(62.5/125) | 02=0.25mm | 05=50cm | A1(2, 3, 4) | FU(A)=FC/UPC(APC) |
22=2x2 | 13=1300nm | 02=02/98 | OM2(50/125) | 09=0.9mm | 10=100cm | B1(2) | SU(A)=SC/UPC(APC) |
13=1x3 | 83=850&1300nm | … | OM3(50/125) | 20=2mm | … | C1(2) | … |
… | / | 40=40/60 | OM4(50/125) | 30=3mm | 20=200cm | D1 | LU(A)=LC/UPC(APC) |
18=1x8 | 00=50/50 | / | X=Customization |