Active Member
|
[China]
Address: Suqian City, Jiangsu Province, China
Contact name:Sales
Suqian Wangtong Photoelectricity Technology Co., Ltd. |
|
Fiber Cable OPGW G652 G655 Power Optical Cable-Optical Fiber Composite Ground Wire
Description
OPGW Cable, Optical Fiber Composite Overhead Ground Wire, also known as Fiber Composite Overhead line. The optical fiber is placed in the ground line of overhead high voltage transmission line and used to form the optical fiber communication network on the transmission line. This structure has the double function of ground wire and communication, commonly known as OPGW optical cable.
Product Show
Specification
Central Tube Optical Ground Wire (OPGW)
Description:
The Central Tube Optical Ground Wire (OPGW) is surrounded by single
or double layers of aluminum clad steel wires(ACS) or mix ACS wires
and aluminum alloy wires. are the most widely used cables ,their
design is fully adapted to the most common electric line needs.
Typical design for Single Layer:
| Specification | Fiber Count | Diameter (mm) | Weight(kg/km) | RTS (KN) | Short Circuit Capacity(KA2s) |
| OPGW-32(40.6;4.7) | 12 | 7.8 | 243 | 40.6 | 4.7 |
| OPGW-42(54.0;8.4) | 24 | 9 | 313 | 54 | 8.4 |
| OPGW-42(43.5;10.6) | 24 | 9 | 284 | 43.5 | 10.6 |
| OPGW-54(55.9;17.5) | 36 | 10.2 | 394 | 67.8 | 13.9 |
| OPGW-61(73.7;175) | 48 | 10.8 | 438 | 73.7 | 17.5 |
| OPGW-61(55.1;24.5) | 48 | 10.8 | 358 | 55.1 | 24.5 |
| OPGW-68(80.8;21.7) | 54 | 11.4 | 485 | 80.8 | 21.7 |
| OPGW-75(54.5;41.7) | 60 | 12 | 459 | 63 | 36.3 |
| OPGW-76(54.5;41.7) | 60 | 12 | 385 | 54.5 | 41.7 |
Typical design for Double Layer:
| Specification | Fiber Count | Diameter (mm) | Weight (kg/km) | RTS (KN) | Short Circuit (KA2s) |
| OPGW-96[121.7;42.2] | 12 | 13 | 671 | 121.7 | 42.2 |
| OPGW-127[141.0;87.9] | 24 | 15 | 825 | 141 | 87.9 |
| OPGW-127[77.8;128.0] | 24 | 15 | 547 | 77.8 | 128 |
| OPGW-145(121.0;132.2) | 28 | 16 | 857 | 121 | 132.2 |
| OPGW-163(138.2;183.6) | 36 | 17 | 910 | 138.2 | 186.3 |
| OPGW-163(99.9;213.7) | 36 | 17 | 694 | 99.9 | 213.7 |
| OPGW-183(109.7;268.7) | 48 | 18 | 775 | 109.7 | 268.7 |
| OPGW-183(118.4;261.6) | 48 | 18 | 895 | 118.4 | 261.6 |
Stranded Optical Ground Wire (OPGW)
Description:
The Stranded Optical Ground Wire (OPGW) is stranded by double or
three layers of aluminum clad steel wires(ACS) or mix ACS wires and
aluminum alloy wires.
Typical design for Double Layer:
| Specification | Fiber Count | Diameter (mm) | Weight(kg/km) | RTS (KN) | Short Circuit Capacity(KA2s) |
| OPGW-232(343.0;191.4) | 28 | 20.15 | 1696 | 343.0 | 91.4 |
| OPGW-254(116.5;554.6) | 26 | 21 | 889 | 116.5 | 554.6 |
| OPGW-347(366.9;687.7) | 48 | 24.7 | 2157 | 366.9 | 687.7 |
| OPGW-282(358.7;372.1) | 96 | 22.5 | 1938 | 358.7 | 372.1 |
Characteristics
Stranded Stainless Steel Tube OPGW
1. High quality standards for designing, testing and producing with grade A materials available to ensure long-term reliability.
2. Engineering support supervising and providing its own line of accessories hardware.
3. Seal stainless steel tube superior protection to the fiber optical to moisture and extreme environmental conditions such as lighting
4. To construct OPGW must cut power,resulting in greater loss,thus OPGW must be used in constructing high pressure line over 110kv.
5. Apply to the transformation of old lines.
Central (Al-covered) Stainless Steel Tube OPGW
1. High quality standards for designing, testing and producing with grade A materials available to ensure long-term reliability.
2. Engineering support supervising and providing its own line of accessories hardware.
3. Larger tensile strength and fault current capacity to reach a better balance of electrical and mechanical performance.
Aluminum Tube OPGW
1. Good anti-corrosion performance.
2. Material and structure are uniform,good resistance to vibration fatigue.
3. Short circuit current has small effect on the optical fiber transmission properties.
4. Good anti-lightening performance.
Installation
1.Standard Packaging
Rolled by wooden wooden drums.2000m to 5000m/drum or other required.
2. Sheath mark
The following printing is applied at 1-meter intervals.
a. Supplier: Wangtong or as cuctomer required
b. Standard Code(Product Type, Fiber Type, Fiber Count)
c. Year of manufacture: xxx
d. Length marking in meters
OEM Service
FAQ
Contact Us
Email: cable.supplier@foxmail.com
Phone & Whatsapp: 0086 18205247610
